On 2022/11/15 22:46, Quentin Schulz wrote:
From: Quentin Schulz quentin.schulz@theobroma-systems.com
This synchronizes the Device Trees related to Puma RK3399 SoM with Linux kernel next-20221114 to include two important changes pertaining to eMMC and SD card instability.
Cc: Quentin Schulz foss+uboot@0leil.net Signed-off-by: Quentin Schulz quentin.schulz@theobroma-systems.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
To: Simon Glass sjg@chromium.org To: Philipp Tomsich philipp.tomsich@vrull.eu To: Kever Yang kever.yang@rock-chips.com To: Klaus Goger klaus.goger@theobroma-systems.com Cc: u-boot@lists.denx.de
arch/arm/dts/rk3399-puma-haikou.dts | 5 +++-- arch/arm/dts/rk3399-puma.dtsi | 32 +++++++++++++++++++++++++++++++- 2 files changed, 34 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/rk3399-puma-haikou.dts b/arch/arm/dts/rk3399-puma-haikou.dts index 292bb7e80c..115c14c0a3 100644 --- a/arch/arm/dts/rk3399-puma-haikou.dts +++ b/arch/arm/dts/rk3399-puma-haikou.dts @@ -49,7 +49,7 @@ sgtl5000_clk: sgtl5000-oscillator { compatible = "fixed-clock"; #clock-cells = <0>;
clock-frequency = <24576000>;
clock-frequency = <24576000>;};
dc_12v: dc-12v {
@@ -207,7 +207,7 @@ cap-sd-highspeed; cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; disable-wp;
- max-frequency = <150000000>;
- max-frequency = <40000000>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; vmmc-supply = <&vcc3v3_baseboard>;
@@ -232,6 +232,7 @@
&usbdrd_dwc3_0 { dr_mode = "otg";
- extcon = <&extcon_usb3>; status = "okay"; };
diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi index fb67db4619..aa3e21bd6c 100644 --- a/arch/arm/dts/rk3399-puma.dtsi +++ b/arch/arm/dts/rk3399-puma.dtsi @@ -25,6 +25,13 @@ }; };
- extcon_usb3: extcon-usb3 {
compatible = "linux,extcon-usb-gpio";id-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;pinctrl-names = "default";pinctrl-0 = <&usb3_id>;- };
- clkin_gmac: external-gmac-clock { compatible = "fixed-clock"; clock-frequency = <125000000>;
@@ -55,7 +62,6 @@ vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
enable-active-low;@@ -71,6 +77,17 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; };
vdd_log: vdd-log {
compatible = "pwm-regulator";pwms = <&pwm2 0 25000 1>;pwm-supply = <&vcc5v0_sys>;regulator-name = "vdd_log";regulator-min-microvolt = <800000>;regulator-max-microvolt = <1400000>;regulator-always-on;regulator-boot-on;}; };
&cpu_b0 {
@@ -422,9 +439,22 @@ <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; };
usb3 {
usb3_id: usb3-id {rockchip,pins =<1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;};}; };
&sdhci {
/*
* Signal integrity isn't great at 200MHz but 100MHz has proven stable* enough.*/max-frequency = <100000000>;
bus-width = <8>; mmc-hs400-1_8v; mmc-hs400-enhanced-strobe;
base-commit: c4ee4fe92e9be120be6d12718273dec6b63cc7d9 change-id: 20221115-puma-dts-sync-b73a5c739ad8
Best regards,