On 15 April 2015 at 19:03, Michal Simek michal.simek@xilinx.com wrote:
From: Siva Durga Prasad Paladugu siva.durga.paladugu@xilinx.com
Added the SPI driver support for ZynqMP The controller is same as zynq SPI controller
Signed-off-by: Siva Durga Prasad Paladugu sivadur@xilinx.com Signed-off-by: Michal Simek michal.simek@xilinx.com
arch/arm/include/asm/arch-zynqmp/hardware.h | 3 +++ include/configs/xilinx_zynqmp.h | 8 ++++++++ 2 files changed, 11 insertions(+)
diff --git a/arch/arm/include/asm/arch-zynqmp/hardware.h b/arch/arm/include/asm/arch-zynqmp/hardware.h index 1fedb1bb4b94..c9dc49d78317 100644 --- a/arch/arm/include/asm/arch-zynqmp/hardware.h +++ b/arch/arm/include/asm/arch-zynqmp/hardware.h @@ -11,6 +11,9 @@ #define ZYNQ_SERIAL_BASEADDR0 0xFF000000 #define ZYNQ_SERIAL_BASEADDR1 0xFF001000
+#define ZYNQ_SPI_BASEADDR0 0xFF040000 +#define ZYNQ_SPI_BASEADDR1 0xFF050000
#define ZYNQ_I2C_BASEADDR0 0xFF020000 #define ZYNQ_I2C_BASEADDR1 0xFF030000
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 54bca6d47b72..df7541b85baf 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -71,6 +71,14 @@ #define CONFIG_CMD_ELF #define CONFIG_MP
+/* SPI */ +#ifdef CONFIG_ZYNQ_SPI +# define CONFIG_SPI_FLASH +# define CONFIG_SPI_FLASH_SST +# define CONFIG_CMD_SPI
CMD_SPI is never been verified I suppose, if so not required at this point of time.
+# define CONFIG_CMD_SF +#endif
#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1) # define CONFIG_MMC
# define CONFIG_GENERIC_MMC
2.3.5
thanks!