From: Jagan Teki jagan@amarulasolutions.com
Let the runtime code can set the mmcdev and mmcroot based on the devno using mmc_get_env_dev instead of defining separately in build-time configs using mmc_late_init func.
Cc: Matteo Lisi matteo.lisi@engicam.com Cc: Michael Trimarchi michael@amarulasolutions.com Cc: Stefano Babic sbabic@denx.de Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- board/engicam/geam6ul/geam6ul.c | 22 ++++++++++++++++++++++ include/configs/imx6ul_geam.h | 2 -- 2 files changed, 22 insertions(+), 2 deletions(-)
diff --git a/board/engicam/geam6ul/geam6ul.c b/board/engicam/geam6ul/geam6ul.c index 29a4830..3593719 100644 --- a/board/engicam/geam6ul/geam6ul.c +++ b/board/engicam/geam6ul/geam6ul.c @@ -7,6 +7,7 @@ */
#include <common.h> +#include <mmc.h>
#include <asm/io.h> #include <asm/gpio.h> @@ -103,12 +104,33 @@ static void setup_gpmi_nand(void) } #endif /* CONFIG_NAND_MXS */
+#ifdef CONFIG_ENV_IS_IN_MMC +static void mmc_late_init(void) +{ + char cmd[32]; + char mmcblk[32]; + u32 dev_no = mmc_get_env_dev(); + + setenv_ulong("mmcdev", dev_no); + + /* Set mmcblk env */ + sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw", dev_no); + setenv("mmcroot", mmcblk); + + sprintf(cmd, "mmc dev %d", dev_no); + run_command(cmd, 0); +} +#endif + int board_late_init(void) { switch ((imx6_src_get_boot_mode() & IMX6_BMODE_MASK) >> IMX6_BMODE_SHIFT) { case IMX6_BMODE_SD: case IMX6_BMODE_ESD: +#ifdef CONFIG_ENV_IS_IN_MMC + mmc_late_init(); +#endif setenv("modeboot", "mmcboot"); break; case IMX6_BMODE_NAND: diff --git a/include/configs/imx6ul_geam.h b/include/configs/imx6ul_geam.h index e9a1a06..d331744 100644 --- a/include/configs/imx6ul_geam.h +++ b/include/configs/imx6ul_geam.h @@ -44,9 +44,7 @@ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ "fdt_addr=0x87800000\0" \ "boot_fdt=try\0" \ - "mmcdev=0\0" \ "mmcpart=1\0" \ - "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ "nandroot=ubi0:rootfs rootfstype=ubifs\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \