Cubox-i boards are also supported, so update the README file.
Signed-off-by: Fabio Estevam fabio.estevam@freescale.com --- Changes since v1: - None
board/solidrun/mx6cuboxi/README | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/board/solidrun/mx6cuboxi/README b/board/solidrun/mx6cuboxi/README index 3050c48..b417ff0 100644 --- a/board/solidrun/mx6cuboxi/README +++ b/board/solidrun/mx6cuboxi/README @@ -1,7 +1,7 @@ -How to use U-boot on Solid-run mx6 hummingboard ------------------------------------------------ +How to use U-boot on Solid-run mx6 Hummingboard and Cubox-i +-----------------------------------------------------------
-- Build U-boot for hummingboard: +- Build U-boot for Hummingboard/Cubox-i:
$ make mrproper $ make mx6cuboxi_defconfig @@ -17,5 +17,5 @@ sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync
-- Insert the SD card in the hummingboard, power it up and U-boot messages -should come up. +- Insert the SD card in the board, power it up and U-boot messages should +come up.