This introduces a new defconfig for the BananaPi, which includes support for the BL035 LCD module distributed by Lemaker for use with this board.
Signed-off-by: Paul Kocialkowski contact@paulk.fr --- configs/Bananapi_LCD_BL035_defconfig | 29 ++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 configs/Bananapi_LCD_BL035_defconfig
diff --git a/configs/Bananapi_LCD_BL035_defconfig b/configs/Bananapi_LCD_BL035_defconfig new file mode 100644 index 0000000000..b0a8fb9099 --- /dev/null +++ b/configs/Bananapi_LCD_BL035_defconfig @@ -0,0 +1,29 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_SPL=y +CONFIG_MACH_SUN7I=y +CONFIG_DRAM_CLK=432 +CONFIG_MACPWR="PH23" +CONFIG_VIDEO_COMPOSITE=y +CONFIG_VIDEO_LCD_MODE="x:320,y:240,depth:24,pclk_khz:7000,le:38,ri:20,up:15,lo:4,hs:30,vs:3,sync:0,vmode:0" +CONFIG_VIDEO_LCD_DE_LOW=y +CONFIG_VIDEO_LCD_POWER="PH12" +CONFIG_VIDEO_LCD_BL_EN="PH8" +CONFIG_VIDEO_LCD_BL_PWM="PB2" +# CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set +CONFIG_GMAC_TX_DELAY=3 +CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi" +CONFIG_AHCI=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_I2C_SUPPORT=y +# CONFIG_CMD_FLASH is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_NETCONSOLE=y +CONFIG_SCSI_AHCI=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_RGMII=y +CONFIG_SUN7I_GMAC=y +CONFIG_SCSI=y +CONFIG_USB_EHCI_HCD=y +CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y