From: Fabio Estevam festevam@denx.de Trying to boot a fitImage after a successful hab_auth_img operation causes the following error: ## Loading kernel from FIT Image at 88000000 ... Using 'conf-imx7d-smegw01.dtb' configuration Trying 'kernel-1' kernel subimage Description: Linux kernel Type: Kernel Image Compression: uncompressed Data Start: 0x8800010c Data Size: 9901752 Bytes = 9.4 MiB Architecture: ARM OS: Linux Load Address: 0x80800000 Entry Point: 0x80800000 Hash algo: sha256 Hash value: 28f8779bbf010780f16dd3d84ecb9b604c44c5c2cf7acd098c264a2d3f68e969 Verifying Hash Integrity ... sha256Error in SEC deq CAAM was not setup properly or it is faulty error! The reason for this error is that the BootROM uses the CAAM Job Ring 0, so disable its node in U-Boot to avoid the resource conflict. imx8m dtsi files also have the Job Ring 0 disable since the following kernel commit: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/ar... For a temporary solution, disable the Job Ring 0 in imx7s-u-boot.dtsi. Reported-by: Eduard Strehlau eduard@lionizers.com Signed-off-by: Fabio Estevam festevam@denx.de
Applied to u-boot-imx, master, thanks !
Best regards, Stefano Babic