Set a value before changing gpio direction. This will ensure that the old value is not propagated when direction has changed but new value is not written yet.
Reported-by: Stefan Herbrechtsmeier stefan@herbrechtsmeier.net Signed-off-by: Michal Simek michal.simek@xilinx.com ---
drivers/gpio/xilinx_gpio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpio/xilinx_gpio.c b/drivers/gpio/xilinx_gpio.c index 776a147cc8d7..1e5f3da8d7e8 100644 --- a/drivers/gpio/xilinx_gpio.c +++ b/drivers/gpio/xilinx_gpio.c @@ -139,14 +139,14 @@ static int xilinx_gpio_direction_output(struct udevice *dev, unsigned offset, if (platdata->bank_input[bank]) return -EINVAL;
+ xilinx_gpio_set_value(dev, offset, value); + if (!platdata->bank_output[bank]) { val = readl(&platdata->regs->gpiodir + bank * 2); val = val & ~(1 << pin); writel(val, &platdata->regs->gpiodir + bank * 2); }
- xilinx_gpio_set_value(dev, offset, value); - return 0; }