Wolfgang,
Please pull directly into 1.3.2 if possible
thanks, Ben
Acked-by: Ben Warren biggerbadderben@gmail.com
On Wed, Feb 27, 2008 at 4:06 PM, Kim Phillips kim.phillips@freescale.com wrote:
erratum 5.6 states the autoneg completion bit is functional only if the autoneg bit is asserted.
This fixes any secondarily-issued networking commands on non-gigabit links on the mpc8360 mds board.
Signed-off-by: Kim Phillips kim.phillips@freescale.com
gvb, please test, and give us your blessings if this fixes your second ping failing issue.
To go through biggerbadderben, for 1.3.2.
drivers/qe/uec_phy.c | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c index c549b6b..cf9921b 100644 --- a/drivers/qe/uec_phy.c +++ b/drivers/qe/uec_phy.c @@ -574,6 +574,7 @@ void marvell_phy_interface_mode (struct eth_device *dev, { uec_private_t *uec = (uec_private_t *) dev->priv; struct uec_mii_info *mii_info;
u16 status; if (!uec->mii_info) { printf ("%s: the PHY not intialized\n", __FUNCTION__);@@ -609,6 +610,13 @@ void marvell_phy_interface_mode (struct eth_device *dev, phy_write (mii_info, 0x00, 0x8100); udelay (1000000); }
/* handle 88e1111 rev.B2 erratum 5.6 */if (mii_info->autoneg) {status = phy_read (mii_info, PHY_BMCR);phy_write (mii_info, PHY_BMCR, status | PHY_BMCR_AUTON);}/* now the B2 will correctly report autoneg completion status */}
void change_phy_interface_mode (struct eth_device *dev, enet_interface_e mode)
1.5.4.23.gef5b9