This patch brings the following changes to the x600 board support:
- Add USB EHCI support - Add VFAT support for USB key file access - Increase malloc size (for UBI / UBIFS usage) - Enable Thumb mode to save some image space - Remove unreferenced CONFIG_STACKSIZE - Remove unreferenced CONFIG_SPL_NO_PRINTF
Signed-off-by: Stefan Roese sr@denx.de Cc: Viresh Kumar viresh.kumar@linaro.org Cc: Vipin Kumar vk.vipin@gmail.com --- include/configs/x600.h | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/include/configs/x600.h b/include/configs/x600.h index 70e633c..6a57388 100644 --- a/include/configs/x600.h +++ b/include/configs/x600.h @@ -30,6 +30,7 @@ #define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO #define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + \ CONFIG_SYS_SPL_LEN) +#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_MONITOR_LEN 0x60000
@@ -98,6 +99,12 @@ #define CONFIG_FPGA_SPARTAN3 #define CONFIG_FPGA_COUNT 1
+/* USB EHCI options */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_SPEAR +#define CONFIG_USB_STORAGE +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 + /* * Command support defines */ @@ -105,7 +112,9 @@ #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV +#define CONFIG_CMD_FAT #define CONFIG_CMD_FPGA_LOADMK +#define CONFIG_CMD_FS_GENERIC #define CONFIG_CMD_GPIO #define CONFIG_CMD_I2C #define CONFIG_CMD_MII @@ -115,8 +124,13 @@ #define CONFIG_CMD_SAVES #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS +#define CONFIG_CMD_USB #define CONFIG_LZO
+/* Filesystem support (for USB key) */ +#define CONFIG_SUPPORT_VFAT +#define CONFIG_DOS_PARTITION + #define CONFIG_BOOTDELAY 3
#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ @@ -148,10 +162,11 @@
#define CONFIG_SYS_MEMTEST_START 0x00800000 #define CONFIG_SYS_MEMTEST_END 0x04000000 -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) +#define CONFIG_SYS_MALLOC_LEN (8 << 20) #define CONFIG_IDENT_STRING "-SPEAr" #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) @@ -240,9 +255,6 @@ "bootcmd=run nand_ubifs\0" \ "\0"
-/* Stack sizes */ -#define CONFIG_STACKSIZE (512 * 1024) - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 0x00000000 @@ -274,7 +286,6 @@ #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */ #define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */ -#define CONFIG_SPL_NO_PRINTF
/* * Please select/define only one of the following