Re: [U-Boot] [PATCH v3 10/15] arm: dts: imx6qdl-icore-rqs: Add eMMC node

On 02/02/2017 15:56, Jagan Teki wrote:

Add usdhc4 node, which is eMMC for Engicam i.CoreM6 RQS modules.

eMMC Log:

icorem6qdl-rqs> mmc dev 1 switch to partitions #0, OK mmc1(part 0) is current device icorem6qdl-rqs> mmcinfo Device: FSL_SDHC Manufacturer ID: fe OEM: 14e Name: MMC04 Tran Speed: 52000000 Rd Block Len: 512 MMC version 4.4.1 High Capacity: Yes Capacity: 3.5 GiB Bus Width: 4-bit Erase Group Size: 512 KiB HC WP Group Size: 4 MiB User Capacity: 3.5 GiB Boot Capacity: 16 MiB ENH RPMB Capacity: 128 KiB ENH

Cc: Stefano Babic sbabic@denx.de Cc: Matteo Lisi matteo.lisi@engicam.com Cc: Michael Trimarchi michael@amarulasolutions.com Signed-off-by: Jagan Teki jagan@amarulasolutions.com

---

arch/arm/dts/imx6qdl-icore-rqs.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)

diff --git a/arch/arm/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/dts/imx6qdl-icore-rqs.dtsi index 750229b..8b9d5b4 100644 --- a/arch/arm/dts/imx6qdl-icore-rqs.dtsi +++ b/arch/arm/dts/imx6qdl-icore-rqs.dtsi @@ -107,6 +107,13 @@ status = "okay"; };

+&usdhc4 {

• pinctrl-names = "default";
• pinctrl-0 = <&pinctrl_usdhc4>;
• no-1-8-v;
• status = "okay";

+};

&iomuxc { pinctrl_enet: enetgrp { fsl,pins = < @@ -167,4 +174,19 @@ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17070 >; };

• pinctrl_usdhc4: usdhc4grp {

• fsl,pins = <
  

• 	MX6QDL_PAD_SD4_CMD__SD4_CMD    0x17070
  

• 	MX6QDL_PAD_SD4_CLK__SD4_CLK    0x10070
  

• 	MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17070
  

• 	MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17070
  

• 	MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17070
  

• 	MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17070
  

• 	MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17070
  

• 	MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17070
  

• 	MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17070
  

• 	MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17070
  

• >;
  

• };

};

Reviewed by : Stefano Babic |sbabic@denx.de>

Best regards, Stefano Babic