Re: [U-Boot-Users] U-Boot+CSB637

subramanian mohankumar mohankrs@yahoo.com schreibt:

Thanks for u'r suggestion. I downloaded u-boot1.1.3 from net. We are now reducing the PLL clock to < 180Mhz.

I set the clocks at 184.320MHz, since this is the value the Cogent-supplied boot-loader uses, and the value Linux expects. If the CSB637 doesn't work with that clock frequency, it's really Cogent's problem.

or is there any seperate config file for csb637 board.

yes...

make csb637_config

...but please bear in mind that the patches I mentioned have not been merged yet - you have to apply them yourself first.

Can we use the loader.bin, boot.bin that was supplied with Atmel's development kit(AT91RM9200dk) for CSB637 board.

No (and you don't need them).

Cheers Anders