Hi Frank,
On 06/04/19 20:12, Frank Wunderlich wrote:
"mmc eraseenv" allows to erase the section on mmc where env is stored
Why do we need a specific command for MMC ? If we need such a command, should it not unaware of the storage ? That is a "env eraseenv", and this calls the corresponding function for SPI /MMC / NAND /.. ?
Best regards, Stefano Babic
Signed-off-by: Frank Wunderlich frank-w@public-files.de
cmd/mmc.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)
diff --git a/cmd/mmc.c b/cmd/mmc.c index 8bc3648193..b8e2c353b4 100644 --- a/cmd/mmc.c +++ b/cmd/mmc.c @@ -441,6 +441,37 @@ static int do_mmc_erase(cmd_tbl_t *cmdtp, int flag,
return (n == cnt) ? CMD_RET_SUCCESS : CMD_RET_FAILURE; }
+static int do_mmc_erase_env(cmd_tbl_t *cmdtp, int flag,
int argc, char * const argv[])+{
- struct mmc *mmc;
- u32 blk, cnt, n;
- if (argc != 1)
return CMD_RET_USAGE;- mmc = init_mmc_device(curr_device, false);
- if (!mmc)
return CMD_RET_FAILURE;- blk = CONFIG_ENV_OFFSET / mmc->read_bl_len;
- cnt = CONFIG_ENV_SIZE / mmc->read_bl_len;
- printf("\nMMC erase env: dev # %d, block # %d (0x%8x), count %d (0x%8x)",
curr_device, blk, blk * mmc->read_bl_len,cnt, cnt * mmc->read_bl_len);- if (mmc_getwp(mmc) == 1) {
printf("Error: card is write protected!\n");return CMD_RET_FAILURE;- }
- n = blk_derase(mmc_get_blk_desc(mmc), blk, cnt);
- printf("%d blocks erased: %s\n", n, (n == cnt) ? "OK" : "ERROR");
- return (n == cnt) ? CMD_RET_SUCCESS : CMD_RET_FAILURE;
+} #endif
static int do_mmc_rescan(cmd_tbl_t *cmdtp, int flag, @@ -878,6 +909,7 @@ static cmd_tbl_t cmd_mmc[] = { #if CONFIG_IS_ENABLED(MMC_WRITE) U_BOOT_CMD_MKENT(write, 4, 0, do_mmc_write, "", ""), U_BOOT_CMD_MKENT(erase, 3, 0, do_mmc_erase, "", ""),
- U_BOOT_CMD_MKENT(eraseenv, 1, 0, do_mmc_erase_env, "", ""),
#endif #if CONFIG_IS_ENABLED(CMD_MMC_SWRITE) U_BOOT_CMD_MKENT(swrite, 3, 0, do_mmc_sparse_write, "", ""), @@ -940,6 +972,7 @@ U_BOOT_CMD( "mmc swrite addr blk#\n" #endif "mmc erase blk# cnt\n"
- "mmc eraseenv - erase environment\n" "mmc rescan\n" "mmc part - lists available partition on current mmc device\n" "mmc dev [dev] [part] - show or set current mmc device [partition]\n"
-- 2.17.1
U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot