From: Andre Przywara andre.przywara@arm.com
At the moment we only consider the EPHY register for those SoCs were we actually have an internal PHY to configure. However even other SoCs have this register, an expect a bit to be cleared for proper operation with an external PHY.
Rework sun8i_emac_set_syscon_ephy() to be called regardless of the EMAC model, and clear the H3_EPHY_SELECT bit if no internal PHY is used.
This helps with the upcoming H616 support, were we need to consider two EMACs.
Signed-off-by: Andre Przywara andre.przywara@arm.com --- drivers/net/sun8i_emac.c | 31 +++++++++++++------------------ 1 file changed, 13 insertions(+), 18 deletions(-)
diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c index 4524604126c9..e0bf19e34c17 100644 --- a/drivers/net/sun8i_emac.c +++ b/drivers/net/sun8i_emac.c @@ -297,30 +297,29 @@ static void sun8i_adjust_link(struct emac_eth_dev *priv, writel(v, priv->mac_reg + EMAC_CTL0); }
-static int sun8i_emac_set_syscon_ephy(struct emac_eth_dev *priv, u32 *reg) +static u32 sun8i_emac_set_syscon_ephy(struct emac_eth_dev *priv, u32 reg) { if (priv->use_internal_phy) { /* H3 based SoC's that has an Internal 100MBit PHY * needs to be configured and powered up before use */ - *reg &= ~H3_EPHY_DEFAULT_MASK; - *reg |= H3_EPHY_DEFAULT_VALUE; - *reg |= priv->phyaddr << H3_EPHY_ADDR_SHIFT; - *reg &= ~H3_EPHY_SHUTDOWN; - *reg |= H3_EPHY_SELECT; - } else - /* This is to select External Gigabit PHY on - * the boards with H3 SoC. - */ - *reg &= ~H3_EPHY_SELECT; + reg &= ~H3_EPHY_DEFAULT_MASK; + reg |= H3_EPHY_DEFAULT_VALUE; + reg |= priv->phyaddr << H3_EPHY_ADDR_SHIFT; + reg &= ~H3_EPHY_SHUTDOWN; + return reg | H3_EPHY_SELECT; + }
- return 0; + /* This is to select External Gigabit PHY on those boards with + * an internal PHY. Does not hurt on other SoCs. Linux does + * it as well. + */ + return reg & ~H3_EPHY_SELECT; }
static int sun8i_emac_set_syscon(struct sun8i_eth_pdata *pdata, struct emac_eth_dev *priv) { - int ret; u32 reg;
if (priv->variant == R40_GMAC) { @@ -336,11 +335,7 @@ static int sun8i_emac_set_syscon(struct sun8i_eth_pdata *pdata,
reg = readl(priv->sysctl_reg + 0x30);
- if (priv->variant == H3_EMAC || priv->variant == H6_EMAC) { - ret = sun8i_emac_set_syscon_ephy(priv, ®); - if (ret) - return ret; - } + reg = sun8i_emac_set_syscon_ephy(priv, reg);
reg &= ~(SC_ETCS_MASK | SC_EPIT); if (priv->variant == H3_EMAC ||