From: Oleg Kosheliev oleg.kosheliev@ti.com
Added chip type detection and twl6032 support in the battery control and charge functions.
Based on Balaji T K balajitk@ti.com patches for TI u-boot.
Signed-off-by: Oleg Kosheliev oleg.kosheliev@ti.com --- drivers/power/twl6030.c | 54 +++++++++++++++++++++++++++++++++++++++++------ include/twl6030.h | 20 ++++++++++++++++++ 2 files changed, 68 insertions(+), 6 deletions(-)
diff --git a/drivers/power/twl6030.c b/drivers/power/twl6030.c index 6bf1a33..a1c6663 100644 --- a/drivers/power/twl6030.c +++ b/drivers/power/twl6030.c @@ -20,6 +20,15 @@ static struct twl6030_data twl6030_info = { .vbat_shift = TWL6030_VBAT_SHIFT, };
+static struct twl6030_data twl6032_info = { + .chip_type = chip_TWL6032, + .adc_rbase = TWL6032_GPCH0_LSB, + .adc_ctrl = TWL6032_CTRL_P1, + .adc_enable = CTRL_P1_SP1, + .vbat_mult = TWL6032_VBAT_MULT, + .vbat_shift = TWL6032_VBAT_SHIFT, +}; + static int twl6030_gpadc_read_channel(u8 channel_no) { u8 lsb = 0; @@ -115,6 +124,18 @@ int twl6030_get_battery_voltage(void) { int battery_volt = 0; int ret = 0; + u8 vbatch; + + if (twl->chip_type == chip_TWL6030) { + vbatch = TWL6030_GPADC_VBAT_CHNL; + } else { + ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC, + TWL6032_GPSELECT_ISB, + TWL6032_GPADC_VBAT_CHNL); + if (ret) + return ret; + vbatch = 0; + }
/* Start GPADC SW conversion */ ret = twl6030_gpadc_sw2_trigger(); @@ -124,7 +145,7 @@ int twl6030_get_battery_voltage(void) }
/* measure Vbat voltage */ - battery_volt = twl6030_gpadc_read_channel(7); + battery_volt = twl6030_gpadc_read_channel(vbatch); if (battery_volt < 0) { printf("Failed to read battery voltage\n"); return ret; @@ -137,14 +158,35 @@ int twl6030_get_battery_voltage(void)
void twl6030_init_battery_charging(void) { - u8 stat1 = 0; + u8 val = 0; int battery_volt = 0; int ret = 0;
- twl = &twl6030_info; + ret = twl6030_i2c_read_u8(TWL6030_CHIP_USB, USB_PRODUCT_ID_LSB, &val); + if (ret) { + puts("twl6030_init_battery_charging(): could not determine chip!\n"); + return; + } + if (val == 0x30) { + twl = &twl6030_info; + } else if (val == 0x32) { + twl = &twl6032_info; + } else { + puts("twl6030_init_battery_charging(): unsupported chip type\n"); + return; + }
/* Enable VBAT measurement */ - twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC1, VBAT_MEAS); + if (twl->chip_type == chip_TWL6030) { + twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC1, VBAT_MEAS); + twl6030_i2c_write_u8(TWL6030_CHIP_ADC, + TWL6030_GPADC_CTRL, + GPADC_CTRL_SCALER_DIV4); + } else { + twl6030_i2c_write_u8(TWL6030_CHIP_ADC, + TWL6032_GPADC_CTRL2, + GPADC_CTRL2_CH18_SCALER_EN); + }
/* Enable GPADC module */ ret = twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, TOGGLE1, FGS | GPADCS); @@ -161,10 +203,10 @@ void twl6030_init_battery_charging(void) printf("Main battery voltage too low!\n");
/* Check for the presence of USB charger */ - twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, CONTROLLER_STAT1, &stat1); + twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, CONTROLLER_STAT1, &val);
/* check for battery presence indirectly via Fuel gauge */ - if ((stat1 & VBUS_DET) && (battery_volt < 3300)) + if ((val & VBUS_DET) && (battery_volt < 3300)) twl6030_start_usb_charging();
return; diff --git a/include/twl6030.h b/include/twl6030.h index 9399737..7898699 100644 --- a/include/twl6030.h +++ b/include/twl6030.h @@ -110,15 +110,35 @@ #define CTRL_P2_EOCP2 (1 << 1) #define CTRL_P2_BUSY (1 << 0)
+#define TWL6032_CTRL_P1 0x36 +#define CTRL_P1_SP1 (1 << 3) + #define GPCH0_LSB 0x57 #define GPCH0_MSB 0x58
+#define TWL6032_GPCH0_LSB 0x3b + +#define TWL6032_GPSELECT_ISB 0x35 + +#define USB_PRODUCT_ID_LSB 0x02 + +#define TWL6030_GPADC_VBAT_CHNL 0x07 +#define TWL6032_GPADC_VBAT_CHNL 0x12 + +#define TWL6030_GPADC_CTRL 0x2e +#define TWL6032_GPADC_CTRL2 0x2f +#define GPADC_CTRL2_CH18_SCALER_EN (1 << 2) +#define GPADC_CTRL_SCALER_DIV4 (1 << 3) + #define TWL6030_VBAT_MULT 40 * 1000 +#define TWL6032_VBAT_MULT 25 * 1000
#define TWL6030_VBAT_SHIFT (10 + 3) +#define TWL6032_VBAT_SHIFT (12 + 2)
enum twl603x_chip_type{ chip_TWL6030, + chip_TWL6032, chip_TWL603X_cnt };