13 Nov
2012
13 Nov
'12
3:58 a.m.
On 11/08/2012 09:31:10 AM, Peter Niklas wrote:
Hello,
We are using a Zynq SoC on a custom Board. We are trying to use a NAND-Flash (MT29F8G08ABABAWP-IT) to store the Xilinx First Stage Boot Loader, U-Boot, Kernel .... We are having trouble to use the NAND-Flash in U-Boot. Currently we are using U-Boot 2012.04.01-00304-g7639205-dirty. and I get the Messag: NAND: No NAND device found!!! nand_scan_ident for NAND failed
I enabled CMD_NAND in the specific config file: #define CONFIG_NAND_ZYNQ
It's not just an unrecognized (and dirty) SHA1 as Wolfgang pointed out (which is not necessarily that surprising for a custom board, but it's still code we can't see) -- there's not even any CONFIG_NAND_ZYNQ in mainline U-Boot.
-Scott