On 06/07/2016 06:29 AM, Rajesh Bhagat wrote:
Remove Soc specific defines and use generic chasis specific defines for USB controller base address mapping.
Signed-off-by: Rajesh Bhagat rajesh.bhagat@nxp.com
Changes in v2:
- Rebased patch for latest u-boot
<snip>
diff --git a/include/linux/usb/xhci-fsl.h b/include/linux/usb/xhci-fsl.h index 253eddf..199f366 100644 --- a/include/linux/usb/xhci-fsl.h +++ b/include/linux/usb/xhci-fsl.h @@ -51,22 +51,18 @@ struct fsl_xhci { struct dwc3 *dwc3_reg; };
-#if defined(CONFIG_LS102XA) -#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS102XA_XHCI_USB1_ADDR +#if defined(CONFIG_LS102XA) || defined(CONFIG_LS1012A) +#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR #define CONFIG_SYS_FSL_XHCI_USB2_ADDR 0 #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0 #elif defined(CONFIG_LS2080A) -#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS2080A_XHCI_USB1_ADDR -#define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_LS2080A_XHCI_USB2_ADDR -#define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0 -#elif defined(CONFIG_LS1043A) || defined(CONFIG_LS1012A) -#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS1043A_XHCI_USB1_ADDR -#define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_LS1043A_XHCI_USB2_ADDR -#define CONFIG_SYS_FSL_XHCI_USB3_ADDR CONFIG_SYS_LS1043A_XHCI_USB3_ADDR -#elif defined(CONFIG_LS1012A) -#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS1043A_XHCI_USB1_ADDR -#define CONFIG_SYS_FSL_XHCI_USB2_ADDR 0 +#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR +#define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_XHCI_USB2_ADDR #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0 +#elif defined(CONFIG_LS1043A) +#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR +#define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_XHCI_USB2_ADDR +#define CONFIG_SYS_FSL_XHCI_USB3_ADDR CONFIG_SYS_XHCI_USB3_ADDR #endif
Do you plan to consolidate the above section?
York