From: Peng Fan peng.fan@nxp.com
Add clk driver for i.MX8QXP. This basic version supports clk enable/disable/get_rate/set_rate operations for I2C, ENET, SDHC0 and UART clocks.
Signed-off-by: Peng Fan peng.fan@nxp.com Signed-off-by: Anatolij Gustschin agust@denx.de Cc: Stefano Babic sbabic@denx.de --- drivers/clk/Kconfig | 1 + drivers/clk/Makefile | 1 + drivers/clk/imx/Kconfig | 6 + drivers/clk/imx/Makefile | 5 + drivers/clk/imx/clk-imx8.c | 393 +++++++++++++++++++++++++++++++++++++ 5 files changed, 406 insertions(+) create mode 100644 drivers/clk/imx/Kconfig create mode 100644 drivers/clk/imx/Makefile create mode 100644 drivers/clk/imx/clk-imx8.c
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 7853a7a9d3..eadf7f8250 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -100,6 +100,7 @@ config CLK_STM32MP1
source "drivers/clk/at91/Kconfig" source "drivers/clk/exynos/Kconfig" +source "drivers/clk/imx/Kconfig" source "drivers/clk/mvebu/Kconfig" source "drivers/clk/owl/Kconfig" source "drivers/clk/renesas/Kconfig" diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 8bc9f520c1..f87c9aec85 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -7,6 +7,7 @@
obj-$(CONFIG_$(SPL_TPL_)CLK) += clk-uclass.o clk_fixed_rate.o
+obj-y += imx/ obj-y += tegra/ obj-$(CONFIG_ARCH_ASPEED) += aspeed/ obj-$(CONFIG_ARCH_MESON) += clk_meson.o diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig new file mode 100644 index 0000000000..a6fb58d6cf --- /dev/null +++ b/drivers/clk/imx/Kconfig @@ -0,0 +1,6 @@ +config CLK_IMX8 + bool "Clock support for i.MX8" + depends on ARCH_IMX8 + select CLK + help + This enables support clock driver for i.MX8 platforms. diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile new file mode 100644 index 0000000000..5505ae52e2 --- /dev/null +++ b/drivers/clk/imx/Makefile @@ -0,0 +1,5 @@ +# Copyright 2018 NXP +# +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_CLK_IMX8) += clk-imx8.o diff --git a/drivers/clk/imx/clk-imx8.c b/drivers/clk/imx/clk-imx8.c new file mode 100644 index 0000000000..fcb8090d35 --- /dev/null +++ b/drivers/clk/imx/clk-imx8.c @@ -0,0 +1,393 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2018 NXP + * Peng Fan peng.fan@nxp.com + */ + +#include <common.h> +#include <clk-uclass.h> +#include <dm.h> +#include <asm/arch/sci/sci.h> +#include <asm/arch/clock.h> +#include <dt-bindings/clock/imx8qxp-clock.h> +#include <dt-bindings/soc/imx_rsrc.h> +#include <misc.h> + +struct imx8_clks { + ulong id; + const char *name; +}; + +static struct imx8_clks imx8_clk_names[] = { + { IMX8QXP_A35_DIV, "A35_DIV" }, + { IMX8QXP_I2C0_CLK, "I2C0" }, + { IMX8QXP_I2C1_CLK, "I2C1" }, + { IMX8QXP_I2C2_CLK, "I2C2" }, + { IMX8QXP_I2C3_CLK, "I2C3" }, + { IMX8QXP_UART0_CLK, "UART0" }, + { IMX8QXP_UART1_CLK, "UART1" }, + { IMX8QXP_UART2_CLK, "UART2" }, + { IMX8QXP_UART3_CLK, "UART3" }, + { IMX8QXP_SDHC0_CLK, "SDHC0" }, + { IMX8QXP_SDHC1_CLK, "SDHC1" }, + { IMX8QXP_ENET0_AHB_CLK, "ENET0_AHB" }, + { IMX8QXP_ENET0_IPG_CLK, "ENET0_IPG" }, + { IMX8QXP_ENET0_REF_DIV, "ENET0_REF" }, + { IMX8QXP_ENET0_PTP_CLK, "ENET0_PTP" }, + { IMX8QXP_ENET1_AHB_CLK, "ENET1_AHB" }, + { IMX8QXP_ENET1_IPG_CLK, "ENET1_IPG" }, + { IMX8QXP_ENET1_REF_DIV, "ENET1_REF" }, + { IMX8QXP_ENET1_PTP_CLK, "ENET1_PTP" }, +}; + +static ulong imx8_clk_get_rate(struct clk *clk) +{ + sc_pm_clk_t pm_clk; + ulong rate; + u16 resource; + int ret; + + debug("%s(#%lu)\n", __func__, clk->id); + + switch (clk->id) { + case IMX8QXP_A35_DIV: + resource = SC_R_A35; + pm_clk = SC_PM_CLK_CPU; + break; + case IMX8QXP_I2C0_CLK: + resource = SC_R_I2C_0; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_I2C1_CLK: + resource = SC_R_I2C_1; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_I2C2_CLK: + resource = SC_R_I2C_2; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_I2C3_CLK: + resource = SC_R_I2C_3; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_SDHC0_IPG_CLK: + case IMX8QXP_SDHC0_CLK: + case IMX8QXP_SDHC0_DIV: + resource = SC_R_SDHC_0; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_SDHC1_IPG_CLK: + case IMX8QXP_SDHC1_CLK: + case IMX8QXP_SDHC1_DIV: + resource = SC_R_SDHC_1; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_UART0_IPG_CLK: + case IMX8QXP_UART0_CLK: + resource = SC_R_UART_0; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_UART1_CLK: + resource = SC_R_UART_1; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_UART2_CLK: + resource = SC_R_UART_2; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_UART3_CLK: + resource = SC_R_UART_3; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_ENET0_IPG_CLK: + case IMX8QXP_ENET0_AHB_CLK: + case IMX8QXP_ENET0_REF_DIV: + case IMX8QXP_ENET0_PTP_CLK: + resource = SC_R_ENET_0; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_ENET1_IPG_CLK: + case IMX8QXP_ENET1_AHB_CLK: + case IMX8QXP_ENET1_REF_DIV: + case IMX8QXP_ENET1_PTP_CLK: + resource = SC_R_ENET_1; + pm_clk = SC_PM_CLK_PER; + break; + default: + if (clk->id < IMX8QXP_UART0_IPG_CLK || + clk->id >= IMX8QXP_CLK_END) { + printf("%s(Invalid clk ID #%lu)\n", + __func__, clk->id); + return -EINVAL; + } + return -ENOTSUPP; + }; + + ret = sc_pm_get_clock_rate(-1, resource, pm_clk, + (sc_pm_clock_rate_t *)&rate); + if (ret) { + printf("%s err %d\n", __func__, ret); + return ret; + } + + return rate; +} + +static ulong imx8_clk_set_rate(struct clk *clk, unsigned long rate) +{ + sc_pm_clk_t pm_clk; + u32 new_rate = rate; + u16 resource; + int ret; + + debug("%s(#%lu), rate: %lu\n", __func__, clk->id, rate); + + switch (clk->id) { + case IMX8QXP_I2C0_CLK: + resource = SC_R_I2C_0; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_I2C1_CLK: + resource = SC_R_I2C_1; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_I2C2_CLK: + resource = SC_R_I2C_2; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_I2C3_CLK: + resource = SC_R_I2C_3; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_UART0_CLK: + resource = SC_R_UART_0; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_UART1_CLK: + resource = SC_R_UART_1; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_UART2_CLK: + resource = SC_R_UART_2; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_UART3_CLK: + resource = SC_R_UART_3; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_SDHC0_IPG_CLK: + case IMX8QXP_SDHC0_CLK: + case IMX8QXP_SDHC0_DIV: + resource = SC_R_SDHC_0; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_SDHC1_SEL: + case IMX8QXP_SDHC0_SEL: + return 0; + case IMX8QXP_SDHC1_IPG_CLK: + case IMX8QXP_SDHC1_CLK: + case IMX8QXP_SDHC1_DIV: + resource = SC_R_SDHC_1; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_ENET0_IPG_CLK: + case IMX8QXP_ENET0_AHB_CLK: + case IMX8QXP_ENET0_REF_DIV: + case IMX8QXP_ENET0_PTP_CLK: + resource = SC_R_ENET_0; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_ENET1_IPG_CLK: + case IMX8QXP_ENET1_AHB_CLK: + case IMX8QXP_ENET1_REF_DIV: + case IMX8QXP_ENET1_PTP_CLK: + resource = SC_R_ENET_1; + pm_clk = SC_PM_CLK_PER; + break; + default: + if (clk->id < IMX8QXP_UART0_IPG_CLK || + clk->id >= IMX8QXP_CLK_END) { + printf("%s(Invalid clk ID #%lu)\n", + __func__, clk->id); + return -EINVAL; + } + return -ENOTSUPP; + }; + + ret = sc_pm_set_clock_rate(-1, resource, pm_clk, &new_rate); + if (ret) { + printf("%s err %d\n", __func__, ret); + return ret; + } + + return new_rate; +} + +static int __imx8_clk_enable(struct clk *clk, bool enable) +{ + sc_pm_clk_t pm_clk; + u16 resource; + int ret; + + debug("%s(#%lu)\n", __func__, clk->id); + + switch (clk->id) { + case IMX8QXP_I2C0_CLK: + resource = SC_R_I2C_0; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_I2C1_CLK: + resource = SC_R_I2C_1; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_I2C2_CLK: + resource = SC_R_I2C_2; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_I2C3_CLK: + resource = SC_R_I2C_3; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_UART0_CLK: + resource = SC_R_UART_0; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_UART1_CLK: + resource = SC_R_UART_1; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_UART2_CLK: + resource = SC_R_UART_2; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_UART3_CLK: + resource = SC_R_UART_3; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_SDHC0_IPG_CLK: + case IMX8QXP_SDHC0_CLK: + case IMX8QXP_SDHC0_DIV: + resource = SC_R_SDHC_0; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_SDHC1_IPG_CLK: + case IMX8QXP_SDHC1_CLK: + case IMX8QXP_SDHC1_DIV: + resource = SC_R_SDHC_1; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_ENET0_IPG_CLK: + case IMX8QXP_ENET0_AHB_CLK: + case IMX8QXP_ENET0_REF_DIV: + case IMX8QXP_ENET0_PTP_CLK: + resource = SC_R_ENET_0; + pm_clk = SC_PM_CLK_PER; + break; + case IMX8QXP_ENET1_IPG_CLK: + case IMX8QXP_ENET1_AHB_CLK: + case IMX8QXP_ENET1_REF_DIV: + case IMX8QXP_ENET1_PTP_CLK: + resource = SC_R_ENET_1; + pm_clk = SC_PM_CLK_PER; + break; + default: + if (clk->id < IMX8QXP_UART0_IPG_CLK || + clk->id >= IMX8QXP_CLK_END) { + printf("%s(Invalid clk ID #%lu)\n", + __func__, clk->id); + return -EINVAL; + } + return -ENOTSUPP; + } + + ret = sc_pm_clock_enable(-1, resource, pm_clk, enable, 0); + if (ret) { + printf("%s err %d\n", __func__, ret); + return ret; + } + + return 0; +} + +static int imx8_clk_disable(struct clk *clk) +{ + return __imx8_clk_enable(clk, 0); +} + +static int imx8_clk_enable(struct clk *clk) +{ + return __imx8_clk_enable(clk, 1); +} + +#if CONFIG_IS_ENABLED(CMD_CLK) +int soc_clk_dump(void) +{ + struct udevice *dev; + struct clk clk; + unsigned long rate; + int i, ret; + + ret = uclass_get_device_by_driver(UCLASS_CLK, + DM_GET_DRIVER(imx8_clk), &dev); + if (ret) + return ret; + + printf("Clk\t\tHz\n"); + + for (i = 0; i < ARRAY_SIZE(imx8_clk_names); i++) { + clk.id = imx8_clk_names[i].id; + ret = clk_request(dev, &clk); + if (ret < 0) { + debug("%s clk_request() failed: %d\n", __func__, ret); + continue; + } + + ret = clk_get_rate(&clk); + rate = ret; + + clk_free(&clk); + + if (ret == -ENOTSUPP) { + printf("clk ID %lu not supported yet\n", + imx8_clk_names[i].id); + continue; + } + if (ret < 0) { + printf("%s %lu: get_rate err: %d\n", + __func__, imx8_clk_names[i].id, ret); + continue; + } + + printf("%s(%3lu):\t%lu\n", + imx8_clk_names[i].name, imx8_clk_names[i].id, rate); + } + + return 0; +} +#endif + +static struct clk_ops imx8_clk_ops = { + .set_rate = imx8_clk_set_rate, + .get_rate = imx8_clk_get_rate, + .enable = imx8_clk_enable, + .disable = imx8_clk_disable, +}; + +static int imx8_clk_probe(struct udevice *dev) +{ + return 0; +} + +static const struct udevice_id imx8_clk_ids[] = { + { .compatible = "fsl,imx8qxp-clk" }, + { }, +}; + +U_BOOT_DRIVER(imx8_clk) = { + .name = "clk_imx8", + .id = UCLASS_CLK, + .of_match = imx8_clk_ids, + .ops = &imx8_clk_ops, + .probe = imx8_clk_probe, + .flags = DM_FLAG_PRE_RELOC, +};