Now CONFIG_SPL_BUILD is not defined in Kconfig, so "!depends on SPL_BUILD" and "if !SPL_BUILD" are redundant.
Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com ---
Changes in v3: None Changes in v2: - Fix a typo in commit description
Kconfig | 12 ++---------- arch/arm/Kconfig | 7 +++---- arch/arm/cpu/arm1176/bcm2835/Kconfig | 6 +++--- arch/arm/cpu/armv7/exynos/Kconfig | 26 +++++++++++++------------- arch/arm/cpu/armv7/omap3/Kconfig | 8 ++++---- arch/arm/cpu/armv7/s5pc1xx/Kconfig | 4 ++-- arch/arm/cpu/armv7/tegra-common/Kconfig | 12 ++++++------ arch/arm/cpu/armv7/uniphier/Kconfig | 1 - board/compulab/cm_t335/Kconfig | 6 +++--- board/gumstix/pepper/Kconfig | 6 +++--- board/isee/igep0033/Kconfig | 6 +++--- board/phytec/pcm051/Kconfig | 6 +++--- board/samsung/goni/Kconfig | 6 +++--- board/samsung/smdkc100/Kconfig | 6 +++--- board/silica/pengwyn/Kconfig | 6 +++--- board/ti/am335x/Kconfig | 8 ++++---- common/Kconfig | 1 - drivers/core/Kconfig | 16 ++++++---------- drivers/mtd/nand/Kconfig | 4 ---- dts/Kconfig | 1 - include/config_uncmd_spl.h | 4 ++++ scripts/Makefile.uncmd_spl | 4 +++- 22 files changed, 71 insertions(+), 85 deletions(-)
diff --git a/Kconfig b/Kconfig index bdaef56..a66a97f 100644 --- a/Kconfig +++ b/Kconfig @@ -15,7 +15,6 @@ menu "General setup"
config LOCALVERSION string "Local version - append to U-Boot release" - depends on !SPL_BUILD help Append an extra string to the end of your U-Boot version. This will show up on your boot log, for example. @@ -26,7 +25,6 @@ config LOCALVERSION
config LOCALVERSION_AUTO bool "Automatically append version information to the version string" - depends on !SPL_BUILD default y help This will try to automatically determine if the current tree is a @@ -47,7 +45,6 @@ config LOCALVERSION_AUTO
config CC_OPTIMIZE_FOR_SIZE bool "Optimize for size" - depends on !SPL_BUILD default y help Enabling this option will pass "-Os" instead of "-O2" to gcc @@ -95,23 +92,19 @@ config SUPPORT_TPL config SPL bool depends on SUPPORT_SPL - prompt "Enable SPL" if !SPL_BUILD - default y if SPL_BUILD + prompt "Enable SPL" help If you want to build SPL as well as the normal image, say Y.
config TPL bool depends on SPL && SUPPORT_TPL - prompt "Enable TPL" if !SPL_BUILD - default y if TPL_BUILD - default n + prompt "Enable TPL" help If you want to build TPL as well as the normal image and SPL, say Y.
config FIT bool "Support Flattened Image Tree" - depends on !SPL_BUILD help This option allows to boot the new uImage structrure, Flattened Image Tree. FIT is formally a FDT, which can include @@ -135,7 +128,6 @@ config FIT_SIGNATURE
config SYS_EXTRA_OPTIONS string "Extra Options (DEPRECATED)" - depends on !SPL_BUILD help The old configuration infrastructure (= mkconfig + boards.cfg) provided the extra options field. If you have something like diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 41f3220..700e2a8 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -739,9 +739,8 @@ config TEGRA bool "NVIDIA Tegra" select SUPPORT_SPL select SPL - select OF_CONTROL if !SPL_BUILD - select CPU_ARM720T if SPL_BUILD - select CPU_V7 if !SPL_BUILD + select OF_CONTROL + select CPU_V7
config TARGET_VEXPRESS64_AEMV8A bool "Support vexpress_aemv8a" @@ -833,7 +832,7 @@ config ARCH_UNIPHIER select CPU_V7 select SUPPORT_SPL select SPL - select OF_CONTROL if !SPL_BUILD + select OF_CONTROL
endchoice
diff --git a/arch/arm/cpu/arm1176/bcm2835/Kconfig b/arch/arm/cpu/arm1176/bcm2835/Kconfig index 94f57d7..7d0fc67 100644 --- a/arch/arm/cpu/arm1176/bcm2835/Kconfig +++ b/arch/arm/cpu/arm1176/bcm2835/Kconfig @@ -1,12 +1,12 @@ if TARGET_RPI
config DM - default y if !SPL_BUILD + default y
config DM_SERIAL - default y if !SPL_BUILD + default y
config DM_GPIO - default y if !SPL_BUILD + default y
endif diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig index 23869ce..9e47ed3 100644 --- a/arch/arm/cpu/armv7/exynos/Kconfig +++ b/arch/arm/cpu/armv7/exynos/Kconfig @@ -6,7 +6,7 @@ choice config TARGET_SMDKV310 select SUPPORT_SPL bool "Exynos4210 SMDKV310 board" - select OF_CONTROL if !SPL_BUILD + select OF_CONTROL
config TARGET_TRATS bool "Exynos4210 Trats board" @@ -33,32 +33,32 @@ config TARGET_ARNDALE select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select SUPPORT_SPL - select OF_CONTROL if !SPL_BUILD + select OF_CONTROL
config TARGET_SMDK5250 bool "SMDK5250 board" select SUPPORT_SPL - select OF_CONTROL if !SPL_BUILD + select OF_CONTROL
config TARGET_SNOW bool "Snow board" select SUPPORT_SPL - select OF_CONTROL if !SPL_BUILD + select OF_CONTROL
config TARGET_SMDK5420 bool "SMDK5420 board" select SUPPORT_SPL - select OF_CONTROL if !SPL_BUILD + select OF_CONTROL
config TARGET_PEACH_PI bool "Peach Pi board" select SUPPORT_SPL - select OF_CONTROL if !SPL_BUILD + select OF_CONTROL
config TARGET_PEACH_PIT bool "Peach Pit board" select SUPPORT_SPL - select OF_CONTROL if !SPL_BUILD + select OF_CONTROL
endchoice
@@ -66,22 +66,22 @@ config SYS_SOC default "exynos"
config DM - default y if !SPL_BUILD + default y
config DM_SERIAL - default y if !SPL_BUILD + default y
config DM_SPI - default y if !SPL_BUILD + default y
config DM_SPI_FLASH - default y if !SPL_BUILD + default y
config DM_GPIO - default y if !SPL_BUILD + default y
config SYS_MALLOC_F - default y if !SPL_BUILD + default y
source "board/samsung/smdkv310/Kconfig" source "board/samsung/trats/Kconfig" diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig index 2e193ab..b3d5ef3 100644 --- a/arch/arm/cpu/armv7/omap3/Kconfig +++ b/arch/arm/cpu/armv7/omap3/Kconfig @@ -94,16 +94,16 @@ config TARGET_TWISTER endchoice
config DM - default y if !SPL_BUILD + default y
config DM_GPIO - default y if DM && !SPL_BUILD + default y if DM
config DM_SERIAL - default y if DM && !SPL_BUILD + default y if DM
config SYS_MALLOC_F - default y if DM && !SPL_BUILD + default y if DM
config SYS_SOC default "omap3" diff --git a/arch/arm/cpu/armv7/s5pc1xx/Kconfig b/arch/arm/cpu/armv7/s5pc1xx/Kconfig index 6288134..bc73813 100644 --- a/arch/arm/cpu/armv7/s5pc1xx/Kconfig +++ b/arch/arm/cpu/armv7/s5pc1xx/Kconfig @@ -5,11 +5,11 @@ choice
config TARGET_S5P_GONI bool "S5P Goni board" - select OF_CONTROL if !SPL_BUILD + select OF_CONTROL
config TARGET_SMDKC100 bool "Support smdkc100 board" - select OF_CONTROL if !SPL_BUILD + select OF_CONTROL
endchoice
diff --git a/arch/arm/cpu/armv7/tegra-common/Kconfig b/arch/arm/cpu/armv7/tegra-common/Kconfig index a3f5282..2003fc8 100644 --- a/arch/arm/cpu/armv7/tegra-common/Kconfig +++ b/arch/arm/cpu/armv7/tegra-common/Kconfig @@ -28,22 +28,22 @@ config USE_PRIVATE_LIBGCC default y
config DM - default y if !SPL_BUILD + default y
config DM_SERIAL - default y if !SPL_BUILD + default y
config DM_SPI - default y if !SPL_BUILD + default y
config DM_SPI_FLASH - default y if !SPL_BUILD + default y
config DM_I2C - default y if !SPL_BUILD + default y
config DM_GPIO - default y if !SPL_BUILD + default y
source "arch/arm/cpu/armv7/tegra20/Kconfig" source "arch/arm/cpu/armv7/tegra30/Kconfig" diff --git a/arch/arm/cpu/armv7/uniphier/Kconfig b/arch/arm/cpu/armv7/uniphier/Kconfig index afb3c55..b6dc75f 100644 --- a/arch/arm/cpu/armv7/uniphier/Kconfig +++ b/arch/arm/cpu/armv7/uniphier/Kconfig @@ -61,7 +61,6 @@ config CMD_PINMON
config CMD_DDRPHY_DUMP bool "Enable dump command of DDR PHY parameters" - depends on !SPL_BUILD help The command "ddrphy" shows the resulting parameters of DDR PHY training; it is useful for the evaluation of DDR PHY training. diff --git a/board/compulab/cm_t335/Kconfig b/board/compulab/cm_t335/Kconfig index aadbfbc..3a8f304 100644 --- a/board/compulab/cm_t335/Kconfig +++ b/board/compulab/cm_t335/Kconfig @@ -13,12 +13,12 @@ config SYS_CONFIG_NAME default "cm_t335"
config DM - default y if !SPL_BUILD + default y
config DM_GPIO - default y if !SPL_BUILD + default y
config DM_SERIAL - default y if !SPL_BUILD + default y
endif diff --git a/board/gumstix/pepper/Kconfig b/board/gumstix/pepper/Kconfig index 3099a9e..750db85 100644 --- a/board/gumstix/pepper/Kconfig +++ b/board/gumstix/pepper/Kconfig @@ -13,12 +13,12 @@ config SYS_CONFIG_NAME default "pepper"
config DM - default y if !SPL_BUILD + default y
config DM_GPIO - default y if !SPL_BUILD + default y
config DM_SERIAL - default y if !SPL_BUILD + default y
endif diff --git a/board/isee/igep0033/Kconfig b/board/isee/igep0033/Kconfig index 2fe2ef1..9a8421e 100644 --- a/board/isee/igep0033/Kconfig +++ b/board/isee/igep0033/Kconfig @@ -13,12 +13,12 @@ config SYS_CONFIG_NAME default "am335x_igep0033"
config DM - default y if !SPL_BUILD + default y
config DM_GPIO - default y if !SPL_BUILD + default y
config DM_SERIAL - default y if !SPL_BUILD + default y
endif diff --git a/board/phytec/pcm051/Kconfig b/board/phytec/pcm051/Kconfig index 65094cf..bb98715 100644 --- a/board/phytec/pcm051/Kconfig +++ b/board/phytec/pcm051/Kconfig @@ -13,12 +13,12 @@ config SYS_CONFIG_NAME default "pcm051"
config DM - default y if !SPL_BUILD + default y
config DM_GPIO - default y if !SPL_BUILD + default y
config DM_SERIAL - default y if !SPL_BUILD + default y
endif diff --git a/board/samsung/goni/Kconfig b/board/samsung/goni/Kconfig index 2c5d3fc..006e864 100644 --- a/board/samsung/goni/Kconfig +++ b/board/samsung/goni/Kconfig @@ -13,12 +13,12 @@ config SYS_CONFIG_NAME default "s5p_goni"
config DM - default y if !SPL_BUILD + default y
config DM_GPIO - default y if !SPL_BUILD + default y
config DM_SERIAL - default y if !SPL_BUILD + default y
endif diff --git a/board/samsung/smdkc100/Kconfig b/board/samsung/smdkc100/Kconfig index 996fe3c..ea87166 100644 --- a/board/samsung/smdkc100/Kconfig +++ b/board/samsung/smdkc100/Kconfig @@ -13,12 +13,12 @@ config SYS_CONFIG_NAME default "smdkc100"
config DM - default y if !SPL_BUILD + default y
config DM_GPIO - default y if !SPL_BUILD + default y
config DM_SERIAL - default y if !SPL_BUILD + default y
endif diff --git a/board/silica/pengwyn/Kconfig b/board/silica/pengwyn/Kconfig index 6ecda80..2e9a2b3 100644 --- a/board/silica/pengwyn/Kconfig +++ b/board/silica/pengwyn/Kconfig @@ -13,12 +13,12 @@ config SYS_CONFIG_NAME default "pengwyn"
config DM - default y if !SPL_BUILD + default y
config DM_GPIO - default y if !SPL_BUILD + default y
config DM_SERIAL - default y if !SPL_BUILD + default y
endif diff --git a/board/ti/am335x/Kconfig b/board/ti/am335x/Kconfig index cad10c2..8c45892 100644 --- a/board/ti/am335x/Kconfig +++ b/board/ti/am335x/Kconfig @@ -39,15 +39,15 @@ config NOR_BOOT NOR for environment.
config DM - default y if !SPL_BUILD + default y
config DM_GPIO - default y if DM && !SPL_BUILD + default y if DM
config DM_SERIAL - default y if DM && !SPL_BUILD + default y if DM
config SYS_MALLOC_F - default y if DM && !SPL_BUILD + default y if DM
endif diff --git a/common/Kconfig b/common/Kconfig index 2ca002d..f82bc88 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -1,5 +1,4 @@ menu "Command line interface" - depends on !SPL_BUILD
config HUSH_PARSER bool "Use hush shell" diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig index f0d6110..75d182d 100644 --- a/drivers/core/Kconfig +++ b/drivers/core/Kconfig @@ -1,6 +1,5 @@ config DM bool "Enable Driver Model" - depends on !SPL_BUILD help This config option enables Driver Model. This brings in the core support, including scanning of platform data on start-up. If @@ -22,31 +21,28 @@ config SPL_DM
config DM_WARN bool "Enable warnings in driver model" + depends on DM + default y help The dm_warn() function can use up quite a bit of space for its strings. By default this is disabled for SPL builds to save space. This will cause dm_warn() to be compiled out - it will do nothing when called. - depends on DM - default y if !SPL_BUILD - default n if SPL_BUILD
config DM_DEVICE_REMOVE bool "Support device removal" + depends on DM + default y help We can save some code space by dropping support for removing a device. This is not normally required in SPL, so by default this option is disabled for SPL. - depends on DM - default y if !SPL_BUILD - default n if SPL_BUILD
config DM_STDIO bool "Support stdio registration" + depends on DM + default y help Normally serial drivers register with stdio so that they can be used as normal output devices. In SPL we don't normally use stdio, so we can omit this feature. - depends on DM - default y if !SPL_BUILD - default n if SPL_BUILD diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index ccd8211..72825c3 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -6,8 +6,6 @@ config SYS_NAND_SELF_INIT This option, if enabled, provides more flexible and linux-like NAND initialization process.
-if !SPL_BUILD - config NAND_DENALI bool "Support Denali NAND controller" select SYS_NAND_SELF_INIT @@ -34,8 +32,6 @@ config NAND_DENALI_SPARE_AREA_SKIP_BYTES of OOB area before last ECC sector data starts. This is potentially used to preserve the bad block marker in the OOB area.
-endif - if SPL
config SPL_NAND_DENALI diff --git a/dts/Kconfig b/dts/Kconfig index 5fe63f8..ca5bd6f 100644 --- a/dts/Kconfig +++ b/dts/Kconfig @@ -9,7 +9,6 @@ config SUPPORT_OF_CONTROL bool
menu "Device Tree Control" - depends on !SPL_BUILD depends on SUPPORT_OF_CONTROL
config OF_CONTROL diff --git a/include/config_uncmd_spl.h b/include/config_uncmd_spl.h index 9f0fe44..a9106f4 100644 --- a/include/config_uncmd_spl.h +++ b/include/config_uncmd_spl.h @@ -29,5 +29,9 @@ #undef CONFIG_DM_SPI #endif
+#undef CONFIG_DM_WARN +#undef CONFIG_DM_DEVICE_REMOVE +#undef CONFIG_DM_STDIO + #endif /* CONFIG_SPL_BUILD */ #endif /* __CONFIG_UNCMD_SPL_H__ */ diff --git a/scripts/Makefile.uncmd_spl b/scripts/Makefile.uncmd_spl index 0bb7d54..343c3fc 100644 --- a/scripts/Makefile.uncmd_spl +++ b/scripts/Makefile.uncmd_spl @@ -1,6 +1,6 @@ # Makefile version of include/config_uncmd_spl.h # -# Invent a better way +# TODO: Invent a better way
ifdef CONFIG_SPL_BUILD CONFIG_OF_CONTROL= @@ -13,4 +13,6 @@ CONFIG_DM_SPI= CONFIG_DM_SPI_FLASH= endif
+CONFIG_DM_DEVICE_REMOVE= + endif