Re: [U-Boot-Users] Xilinx ML403/PPC U-Boot support

Hi!

I'm using the ml403 as well, trying to boot from Flash, without SysACE. But when I load u-boot, I get the message: ### No HW ID - assuming ML403 DRAM: 64 MB FLASH: ## Unknown FLASH on Bank 0 - Size = 0x00000000 = 0 MB *** failed *** ### ERROR ### Please RESET the board ###

The flash address is ok in hw design.

Any help would be appreciated. Thanks! Paula

-- View this message in context: http://www.nabble.com/Sequence-of-Xilinx-ML403-PPC-t1009012.html#a3278946 Sent from the Uboot - Users forum at Nabble.com.