Zynq lowlevel_init() was implemented in C but stack pointer is setup after function call in _main(). Move architecture setup to arch_cpu_init() which is call as the first function in board_init_f() which already have correct stack pointer.
Reported-by: Sven Schwermer sven.schwermer@tuhh.de Signed-off-by: Michal Simek michal.simek@xilinx.com --- I can't see any problem to call zynq setup a little bit later. There is already expectation that u-boot runs from DDR. Moving lowlevel_init from C to ASM is possible but I will have to introduce new macros with hardcoded values. Using structures is much nicer.
--- arch/arm/cpu/armv7/zynq/cpu.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/arch/arm/cpu/armv7/zynq/cpu.c b/arch/arm/cpu/armv7/zynq/cpu.c index 4367d1a..8846f30 100644 --- a/arch/arm/cpu/armv7/zynq/cpu.c +++ b/arch/arm/cpu/armv7/zynq/cpu.c @@ -11,6 +11,10 @@
void lowlevel_init(void) { +} + +int arch_cpu_init(void) +{ zynq_slcr_unlock(); /* remap DDR to zero, FILTERSTART */ writel(0, &scu_base->filter_start); @@ -31,6 +35,8 @@ void lowlevel_init(void) writel(0xC, &slcr_base->ddr_urgent);
zynq_slcr_lock(); + + return 0; }
void reset_cpu(ulong addr) -- 1.8.2.3