Re: [U-Boot] [PATCH 2/3 RESEND] MX51EVK: Use SWx macros in PMIC init

On Wednesday 19 January 2011 12:15:33 Sergei Shtylyov wrote:

On 19-01-2011 2:19, Marek Vasut wrote:

...

Signed-off-by: Marek Vasutmarek.vasut@gmail.com

[...]

...

diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index 2160d5a..bcf1934 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -198,17 +198,18 @@ static void power_init(void)

/* Set core voltage to 1.1V */ val = pmic_reg_read(REG_SW_0);

• val = (val& (~0x1F)) | 0x14;

• val = (val& (~SWx_VOLT_MASK)) | SWx_1_100V;

  pmic_reg_write(REG_SW_0, val);

  /* Setup VCC (SW2) to 1.25 */ val = pmic_reg_read(REG_SW_1);

• val = (val& (~0x1F)) | 0x1A;

• val = (val& (~SWx_VOLT_MASK)) | SWx_1_250V;

Stray newline?

Nice catch, thanks

WBR, Sergei