On Sunday 08 February 2009, Alessandro Rubini wrote:
From: Alessandro Rubini rubini@unipv.it
This driver implements the ECC algorithm described in the CPU data sheet and uses the OOB layout chosen in already-released development systems (shipped with a custom-made u-boot 1.3.1).
Signed-off-by: Alessandro Rubini rubini@unipv.it Acked-by: Andrea Gallo andrea.gallo@stnwireless.com
Changes from V2: added nomadik.h, moved all register addresses there, fixed what J.C. suggested.
cpu/arm926ejs/nomadik/Makefile | 9 +- cpu/arm926ejs/nomadik/nand.c | 221++++++++++++++++++++++++++++++++++++++++
This driver should go into drivers/mtd/nand instead.
Best regards, Stefan
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================