26 Mar
2019
26 Mar
'19
6:58 p.m.
Hi Michael,
On Tue, Mar 26, 2019 at 5:21 AM Michael Nazzareno Trimarchi michael@amarulasolutions.com wrote:
Not sure why setting GPIO1_6 is causing the board to hang.
Maybe you drain to much power ;)
Yes, that was the issue. This issue can be avoided by powering the board via an externally powered USB hub.
The new baseboard revision B1 seems to drain less power and the issue does not happen there.
Let's discard this patch then and leave the LCD support as is.
Thanks