The DA9063 enables the CRYSTAL bit by default, but there is no crystal populated on the BA16 system on module. Without explicitly clearing the CRYSTAL bit the system runs unstable and sometimes reboots unexpectedly.
Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com --- board/ge/bx50v3/bx50v3.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)
diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c index 6aced4086bdd..6a4e0e601d0a 100644 --- a/board/ge/bx50v3/bx50v3.c +++ b/board/ge/bx50v3/bx50v3.c @@ -31,6 +31,7 @@ #include <asm/arch/sys_proto.h> #include <power/regulator.h> #include <power/da9063_pmic.h> +#include <power/pmic.h> #include <input.h> #include <pwm.h> #include <version.h> @@ -533,6 +534,29 @@ static const struct boot_mode board_boot_modes[] = { }; #endif
+ +/* + * The SoM used by these boards has XTAL not connected despite datasheet + * suggesting connecting unused XTAL pins to ground. Without explicitly + * clearing the CRYSTAL bit the system runs unstable and sometimes reboots + * unexpectedly. + */ +static void pmic_crystal_fix(void) +{ + struct udevice *pmic; + static const uint EN_32K_CRYSTAL = (1 << 3); + + if (pmic_get("pmic@58", &pmic)) { + puts("failed to get device for PMIC\n"); + return; + } + + if (pmic_clrsetbits(pmic, DA9063_REG_EN_32K, EN_32K_CRYSTAL, 0) < 0) { + puts("failed to clear CRYSTAL bit\n"); + return; + } +} + void pmic_init(void) { struct udevice *reg; @@ -546,6 +570,8 @@ void pmic_init(void) "bperi", };
+ pmic_crystal_fix(); + for (i = 0; i < ARRAY_SIZE(bucks); i++) { ret = regulator_get_by_devname(bucks[i], ®); if (reg < 0) {