23 Mar
2012
23 Mar
'12
4:25 a.m.
On 3/22/2012 6:47 PM, Troy Kisky wrote:
On 3/22/2012 3:00 PM, Troy Kisky wrote:
Currently, board files are setting this field to 0x01 which the manual says is a reserved value. Change to use the default of 0x04 - 128 cycles.
Typo, should say default of 0x02 - 128 cycles
Possibly the manual is wrong, and the value of 0x01 corresponds to 64 cycles? My testing was on a DDR2 device where this field is not relevant.
Signed-off-by: Troy Kiskytroy.kisky@boundarydevices.com
board/freescale/mx53ard/imximage_dd3.cfg | 2 +- board/freescale/mx53evk/imximage.cfg | 2 +- board/freescale/mx53loco/imximage.cfg | 2 +- board/freescale/mx53smd/imximage.cfg | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)
I've tested on an mx53, but this needs much more testing before being applied.