Hi Robert,
On 17/09/19 01:37, Robert Hancock wrote:
On 2019-09-16 3:08 p.m., Stefano Babic wrote:
Hi Anatolji,
On 16/09/19 22:20, Anatolij Gustschin wrote:
Hi Jagan,
On Mon, 16 Sep 2019 13:36:03 +0530 Jagan Teki jagan@amarulasolutions.com wrote: ...
arm: + imx6dl_mamoj +spl/u-boot-spl.bin exceeds file size limit: + limit: 53248 bytes + actual: 58597 bytes + excess: 5349 bytes
+make[1]: *** [spl/u-boot-spl.bin] Error 1 +make[1]: *** Deleting file `spl/u-boot-spl.bin' +make: *** [sub-make] Error 2
Any idea which commit make this blow-out. we didn't do anything with this board recently. I guess some default CLK framework or so?
This check fails since the recent changes in SPL size limit check, see commit 25d38f9b34be (imx6: spl: Reduce SPL limit size in case CONFIG_SECURE_BOOT is enabled).
i.MX6DL has 128KiB OCRAM, probably we could increase default SPL_SIZE_LIMIT config in common/spl/Kconfig for i.MX6DL?
Well, the current size was computed for the Solo /DL - Dual / Quad has twice OCRAM. According to chapter "8.4 Internal ROM / RAM map", for Solo /Dl there is 68KB available for user (address 0x907000--0x917FFF). I do not remember the details, but then we have to reserve space for gd, stack, etc. This leads to the actual value.
The patch I posted a while ago ("[PATCH v2] ARM: imx: Support larger SPL size on IMX6DQ") may be helpful for this case.
Your patch is "in" - it is applied to u-boot-imx. However, it cannot help because the current limitation is set for Solo / DL. With your patch, SPL on Dual / Quad can be larger.
If the platform doesn't need to support the "lite" chip versions with smaller OCRAM size,
The SOC is a DL, 128KB
then the available size for the SPL can be increased.
It cannot
Best regards, Stefano Babic