Hi,
I am trying to get U-Boot to work on hardware very similar to the SBC8347 dev board. The main differences are:
SBC8347: My HW: /CS0 8M Flash 64M Flash /CS1 8K EEPROM 128M SDRAM /CS[2:3] 128M SDRAM MCS[0:1] 256M DDR 1G DDR
And the significant changes in start.S (for reference): #define CONFIG_SYS_TEXT_BASE 0xF8000000 #define CONFIG_SYS_FLASH_BASE 0xF8000000 #define CONFIG_SYS_FLASH_SIZE 64 #define CONFIG_SYS_INIT_RAM_ADDR 0xF6000000
I am not setting up any registers using the HW probe, just relying on the HRCW's and debugging in ROM.
So far the code executes ok through start.S up to the call to cpu_init_f() in cpu_init.c where it crashes in the call to memset(), gd=0xF6000F50. CONFIG_SYS_INIT_RAM_ADDR = 0xF6000000. Perhaps the stack-in-cache trick isn't working, or should some RAM be initialised by this point? I don't see where this would have been done though.
Has anyone got any experience with the SBC8347/9 board or anything similar, or is able to provide any suggestions please?
I realise this is old-ish hardware but it's what I'm working with. Any help would be much appreciated.
Regards, David Wells.