Hi Stefan,
On Fri, Jun 16, 2017 at 9:31 PM, Bin Meng bmeng.cn@gmail.com wrote:
Now that xHCD does not use CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS, remove it in all boards' config files.
Signed-off-by: Bin Meng bmeng.cn@gmail.com
include/configs/am43xx_evm.h | 1 - include/configs/am57xx_evm.h | 1 - include/configs/cl-som-am57x.h | 1 - include/configs/cm_t43.h | 1 - include/configs/dra7xx_evm.h | 1 - include/configs/ds414.h | 1 - include/configs/exynos5-common.h | 1 - include/configs/ls1012afrdm.h | 1 - include/configs/ls1012aqds.h | 1 - include/configs/ls1012ardb.h | 1 - include/configs/ls1021aiot.h | 1 - include/configs/ls1021aqds.h | 1 - include/configs/ls1021atwr.h | 1 - include/configs/ls1043aqds.h | 1 - include/configs/ls1043ardb.h | 1 - include/configs/ls1046aqds.h | 1 - include/configs/ls1046ardb.h | 1 - include/configs/ls2080aqds.h | 1 - include/configs/ls2080ardb.h | 1 - include/configs/mvebu_armada-37xx.h | 4 +--- include/configs/mvebu_armada-8k.h | 4 +--- include/configs/rk3328_common.h | 2 -- include/configs/rk3399_common.h | 3 --- include/configs/ti_armv7_keystone2.h | 1 - include/configs/uniphier.h | 3 --- include/configs/xilinx_zynqmp.h | 2 -- scripts/config_whitelist.txt | 1 - 27 files changed, 2 insertions(+), 37 deletions(-)
[snip]
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 2dab065..0a4c90c 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -349,7 +349,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_HAS_FSL_XHCI_USB #define CONFIG_USB_XHCI_FSL #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 -#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#undef CONFIG_CMDLINE_EDITING #include <config_distro_defaults.h> diff --git a/include/configs/mvebu_armada-37xx.h b/include/configs/mvebu_armada-37xx.h index 5408490..7a255a1 100644 --- a/include/configs/mvebu_armada-37xx.h +++ b/include/configs/mvebu_armada-37xx.h @@ -98,10 +98,8 @@ #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
/* USB 3.0 */ -#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 3
#define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \
CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS)
3)
I strongly suspect here CONFIG_USB_MAX_CONTROLLER_COUNT is mistakenly configured, unless each host controller only has 1 root port? Please review.
/* USB ethernet */ #define CONFIG_USB_HOST_ETHER diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h index 9d3aeef..c29d7f9 100644 --- a/include/configs/mvebu_armada-8k.h +++ b/include/configs/mvebu_armada-8k.h @@ -104,10 +104,8 @@ #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
/* USB 3.0 */ -#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 3
#define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \
CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS)
3)
ditto.
/* USB ethernet */ #define CONFIG_USB_HOST_ETHER
[snip]
Regards, Bin