[U-Boot-Users] LAN chip dead on ARM Integrator/CP board

Hi,

I am using an ARM Integrator/CP board with u-boot 1.1.3. It's working well except that the ethernet interface never comes up. I don't see the link lights and a "dhcp" command results in:

SMC91111: PHY auto-negotiate timed out

*** ERROR: ethaddr is not set properly!!

I compiled u-boot using the integrator cp config file. I have modified it somewhat to include some extra commands but the network portion remains the same. Also, the docs for the board state that the board has a LAN91C111 ethernet chip. Anyone encontered this issue? I did not find anything in list archives.

Regards, umar