From: Marcel Ziswiler marcel.ziswiler@toradex.com
Migrate USB to using driver model.
Signed-off-by: Marcel Ziswiler marcel.ziswiler@toradex.com
---
board/toradex/colibri_imx6/colibri_imx6.c | 23 +---------------------- configs/colibri_imx6_defconfig | 1 + 2 files changed, 2 insertions(+), 22 deletions(-)
diff --git a/board/toradex/colibri_imx6/colibri_imx6.c b/board/toradex/colibri_imx6/colibri_imx6.c index ef4dd0c87c..adb5a3df4c 100644 --- a/board/toradex/colibri_imx6/colibri_imx6.c +++ b/board/toradex/colibri_imx6/colibri_imx6.c @@ -289,28 +289,7 @@ int board_ehci_hcd_init(int port) imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads)); return 0; } - -int board_ehci_power(int port, int on) -{ - switch (port) { - case 0: - /* control OTG power */ - /* No special PE for USBC, always on when ID pin signals - host mode */ - break; - case 1: - /* Control MXM USBH */ - /* Set MXM USBH power enable, '0' means on */ - gpio_request(GPIO_USBH_EN, "USBH_EN"); - gpio_direction_output(GPIO_USBH_EN, !on); - mdelay(100); - break; - default: - break; - } - return 0; -} -#endif /* CONFIG_USB_EHCI_MX6 */ +#endif
#if defined(CONFIG_FSL_ESDHC) && defined(CONFIG_SPL_BUILD) /* use the following sequence: eMMC, MMC */ diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig index 2ab7db44a8..df5a7be39f 100644 --- a/configs/colibri_imx6_defconfig +++ b/configs/colibri_imx6_defconfig @@ -68,6 +68,7 @@ CONFIG_DM_REGULATOR_PFUZE100=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_IMX_THERMAL=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_KEYBOARD=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Toradex"