Add some abstraction to NFC definitions so that some parts of the current code can also be used for future i.MX5 code.
Clean up a few things by the way.
Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com Acked-by: Scott Wood scottwood@freescale.com Tested-by: Fabio Estevam fabio.estevam@freescale.com --- Changes in v10: None Changes in v9: None Changes in v8: None Changes in v7: - Fix typo in patch description.
Changes in v6: None Changes in v5: None Changes in v4: None Changes in v3: - Separate code reformatting from behavioral changes.
Changes in v2: - Fix warning for unused tmp variable in board_nand_init() for NFC V1.
drivers/mtd/nand/mxc_nand.c | 92 +++++++++++++++++++++--------------------- include/fsl_nfc.h | 72 ++++++++++++--------------------- nand_spl/nand_boot_fsl_nfc.c | 47 +++++++++++---------- 3 files changed, 97 insertions(+), 114 deletions(-)
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index bb475f2..6ae95d6 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -119,7 +119,7 @@ static uint32_t *mxc_nand_memcpy32(uint32_t *dest, uint32_t *source, size_t size
/* * This function polls the NANDFC to wait for the basic operation to - * complete by checking the INT bit of config2 register. + * complete by checking the INT bit. */ static void wait_op_done(struct mxc_nand_host *host, int max_retries, uint16_t param) @@ -127,10 +127,10 @@ static void wait_op_done(struct mxc_nand_host *host, int max_retries, uint32_t tmp;
while (max_retries-- > 0) { - if (readw(&host->regs->config2) & NFC_INT) { - tmp = readw(&host->regs->config2); - tmp &= ~NFC_INT; - writew(tmp, &host->regs->config2); + tmp = readnfc(&host->regs->config2); + if (tmp & NFC_V1_V2_CONFIG2_INT) { + tmp &= ~NFC_V1_V2_CONFIG2_INT; + writenfc(tmp, &host->regs->config2); break; } udelay(1); @@ -149,8 +149,8 @@ static void send_cmd(struct mxc_nand_host *host, uint16_t cmd) { MTDDEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x)\n", cmd);
- writew(cmd, &host->regs->flash_cmd); - writew(NFC_CMD, &host->regs->config2); + writenfc(cmd, &host->regs->flash_cmd); + writenfc(NFC_CMD, &host->regs->operation);
/* Wait for operation to complete */ wait_op_done(host, TROP_US_DELAY, cmd); @@ -165,8 +165,8 @@ static void send_addr(struct mxc_nand_host *host, uint16_t addr) { MTDDEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x)\n", addr);
- writew(addr, &host->regs->flash_addr); - writew(NFC_ADDR, &host->regs->config2); + writenfc(addr, &host->regs->flash_addr); + writenfc(NFC_ADDR, &host->regs->operation);
/* Wait for operation to complete */ wait_op_done(host, TROP_US_DELAY, addr); @@ -198,19 +198,19 @@ static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id, } }
- writew(buf_id, &host->regs->buf_addr); + writenfc(buf_id, &host->regs->buf_addr);
/* Configure spare or page+spare access */ if (!host->pagesize_2k) { - uint16_t config1 = readw(&host->regs->config1); + uint16_t config1 = readnfc(&host->regs->config1); if (spare_only) - config1 |= NFC_SP_EN; + config1 |= NFC_CONFIG1_SP_EN; else - config1 &= ~NFC_SP_EN; - writew(config1, &host->regs->config1); + config1 &= ~NFC_CONFIG1_SP_EN; + writenfc(config1, &host->regs->config1); }
- writew(NFC_INPUT, &host->regs->config2); + writenfc(NFC_INPUT, &host->regs->operation);
/* Wait for operation to complete */ wait_op_done(host, TROP_US_DELAY, spare_only); @@ -225,19 +225,19 @@ static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id, { MTDDEBUG(MTD_DEBUG_LEVEL3, "send_read_page (%d)\n", spare_only);
- writew(buf_id, &host->regs->buf_addr); + writenfc(buf_id, &host->regs->buf_addr);
/* Configure spare or page+spare access */ if (!host->pagesize_2k) { - uint32_t config1 = readw(&host->regs->config1); + uint32_t config1 = readnfc(&host->regs->config1); if (spare_only) - config1 |= NFC_SP_EN; + config1 |= NFC_CONFIG1_SP_EN; else - config1 &= ~NFC_SP_EN; - writew(config1, &host->regs->config1); + config1 &= ~NFC_CONFIG1_SP_EN; + writenfc(config1, &host->regs->config1); }
- writew(NFC_OUTPUT, &host->regs->config2); + writenfc(NFC_OUTPUT, &host->regs->operation);
/* Wait for operation to complete */ wait_op_done(host, TROP_US_DELAY, spare_only); @@ -265,14 +265,14 @@ static void send_read_id(struct mxc_nand_host *host) uint16_t tmp;
/* NANDFC buffer 0 is used for device ID output */ - writew(0x0, &host->regs->buf_addr); + writenfc(0x0, &host->regs->buf_addr);
/* Read ID into main buffer */ - tmp = readw(&host->regs->config1); - tmp &= ~NFC_SP_EN; - writew(tmp, &host->regs->config1); + tmp = readnfc(&host->regs->config1); + tmp &= ~NFC_CONFIG1_SP_EN; + writenfc(tmp, &host->regs->config1);
- writew(NFC_ID, &host->regs->config2); + writenfc(NFC_ID, &host->regs->operation);
/* Wait for operation to complete */ wait_op_done(host, TROP_US_DELAY, 0); @@ -292,14 +292,14 @@ static uint16_t get_dev_status(struct mxc_nand_host *host) /* store the main area1 first word, later do recovery */ store = readl(main_buf); /* NANDFC buffer 1 is used for device status */ - writew(1, &host->regs->buf_addr); + writenfc(1, &host->regs->buf_addr);
/* Read status into main buffer */ - tmp = readw(&host->regs->config1); - tmp &= ~NFC_SP_EN; - writew(tmp, &host->regs->config1); + tmp = readnfc(&host->regs->config1); + tmp &= ~NFC_CONFIG1_SP_EN; + writenfc(tmp, &host->regs->config1);
- writew(NFC_STATUS, &host->regs->config2); + writenfc(NFC_STATUS, &host->regs->operation);
/* Wait for operation to complete */ wait_op_done(host, TROP_US_DELAY, 0); @@ -328,13 +328,13 @@ static void _mxc_nand_enable_hwecc(struct mtd_info *mtd, int on) { struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; - uint16_t tmp = readw(&host->regs->config1); + uint16_t tmp = readnfc(&host->regs->config1);
if (on) - tmp |= NFC_ECC_EN; + tmp |= NFC_V1_V2_CONFIG1_ECC_EN; else - tmp &= ~NFC_ECC_EN; - writew(tmp, &host->regs->config1); + tmp &= ~NFC_V1_V2_CONFIG1_ECC_EN; + writenfc(tmp, &host->regs->config1); }
#ifdef CONFIG_MXC_NAND_HWECC @@ -667,7 +667,7 @@ static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat, * additional correction. 2-Bit errors cannot be corrected by * HW ECC, so we need to return failure */ - uint16_t ecc_status = readw(&host->regs->ecc_status_result); + uint16_t ecc_status = readnfc(&host->regs->ecc_status_result);
if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) { MTDDEBUG(MTD_DEBUG_LEVEL0, @@ -1210,24 +1210,24 @@ int board_nand_init(struct nand_chip *this) #endif
#ifdef MXC_NFC_V2_1 - tmp = readw(&host->regs->config1); - tmp |= NFC_ONE_CYCLE; - tmp |= NFC_4_8N_ECC; - writew(tmp, &host->regs->config1); + tmp = readnfc(&host->regs->config1); + tmp |= NFC_V2_CONFIG1_ONE_CYCLE; + tmp |= NFC_V2_CONFIG1_ECC_MODE_4; + writenfc(tmp, &host->regs->config1); if (host->pagesize_2k) - writew(64/2, &host->regs->spare_area_size); + writenfc(64/2, &host->regs->spare_area_size); else - writew(16/2, &host->regs->spare_area_size); + writenfc(16/2, &host->regs->spare_area_size); #endif
/* * preset operation * Unlock the internal RAM Buffer */ - writew(0x2, &host->regs->config); + writenfc(0x2, &host->regs->config);
/* Blocks to be unlocked */ - writew(0x0, &host->regs->unlockstart_blkaddr); + writenfc(0x0, &host->regs->unlockstart_blkaddr); /* Originally (Freescale LTIB 2.6.21) 0x4000 was written to the * unlockend_blkaddr, but the magic 0x4000 does not always work * when writing more than some 32 megabytes (on 2k page nands) @@ -1239,10 +1239,10 @@ int board_nand_init(struct nand_chip *this) * This might be NAND chip specific and the i.MX31 datasheet is * extremely vague about the semantics of this register. */ - writew(0xFFFF, &host->regs->unlockend_blkaddr); + writenfc(0xFFFF, &host->regs->unlockend_blkaddr);
/* Unlock Block Command for given address range */ - writew(0x4, &host->regs->wrprot); + writenfc(0x4, &host->regs->wrprot);
return 0; } diff --git a/include/fsl_nfc.h b/include/fsl_nfc.h index ff537b4..013e9e2 100644 --- a/include/fsl_nfc.h +++ b/include/fsl_nfc.h @@ -113,58 +113,38 @@ struct fsl_nfc_regs { #endif };
-/* - * Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register for Command - * operation - */ -#define NFC_CMD 0x1 +/* Set FCMD to 1, rest to 0 for Command operation */ +#define NFC_CMD 0x1
-/* - * Set INT to 0, FADD to 1, rest to 0 in NFC_CONFIG2 Register for Address - * operation - */ -#define NFC_ADDR 0x2 +/* Set FADD to 1, rest to 0 for Address operation */ +#define NFC_ADDR 0x2
-/* - * Set INT to 0, FDI to 1, rest to 0 in NFC_CONFIG2 Register for Input - * operation - */ -#define NFC_INPUT 0x4 +/* Set FDI to 1, rest to 0 for Input operation */ +#define NFC_INPUT 0x4
-/* - * Set INT to 0, FDO to 001, rest to 0 in NFC_CONFIG2 Register for Data - * Output operation - */ -#define NFC_OUTPUT 0x8 +/* Set FDO to 001, rest to 0 for Data Output operation */ +#define NFC_OUTPUT 0x8
-/* - * Set INT to 0, FD0 to 010, rest to 0 in NFC_CONFIG2 Register for Read ID - * operation - */ -#define NFC_ID 0x10 +/* Set FDO to 010, rest to 0 for Read ID operation */ +#define NFC_ID 0x10
-/* - * Set INT to 0, FDO to 100, rest to 0 in NFC_CONFIG2 Register for Read - * Status operation - */ -#define NFC_STATUS 0x20 +/* Set FDO to 100, rest to 0 for Read Status operation */ +#define NFC_STATUS 0x20
-/* - * Set INT to 1, rest to 0 in NFC_CONFIG2 Register for Read Status - * operation - */ -#define NFC_INT 0x8000 +#define NFC_CONFIG1_SP_EN (1 << 2) +#define NFC_CONFIG1_RST (1 << 6) +#define NFC_CONFIG1_CE (1 << 7) +#define NFC_V1_V2_CONFIG1_ECC_EN (1 << 3) +#define NFC_V1_V2_CONFIG1_INT_MSK (1 << 4) +#define NFC_V1_V2_CONFIG1_BIG (1 << 5) +#define NFC_V2_CONFIG1_ECC_MODE_4 (1 << 0) +#define NFC_V2_CONFIG1_ONE_CYCLE (1 << 8) +#define NFC_V2_CONFIG1_FP_INT (1 << 11)
-#ifdef MXC_NFC_V2_1 -#define NFC_4_8N_ECC (1 << 0) -#endif -#define NFC_SP_EN (1 << 2) -#define NFC_ECC_EN (1 << 3) -#define NFC_INT_MSK (1 << 4) -#define NFC_BIG (1 << 5) -#define NFC_RST (1 << 6) -#define NFC_CE (1 << 7) -#define NFC_ONE_CYCLE (1 << 8) -#define NFC_FP_INT (1 << 11) +#define NFC_V1_V2_CONFIG2_INT (1 << 15) + +#define operation config2 +#define readnfc readw +#define writenfc writew
#endif /* __FSL_NFC_H */ diff --git a/nand_spl/nand_boot_fsl_nfc.c b/nand_spl/nand_boot_fsl_nfc.c index a40c998..615e820 100644 --- a/nand_spl/nand_boot_fsl_nfc.c +++ b/nand_spl/nand_boot_fsl_nfc.c @@ -36,13 +36,13 @@ static void nfc_wait_ready(void) { uint32_t tmp;
- while (!(readw(&nfc->config2) & NFC_INT)) + while (!(readnfc(&nfc->config2) & NFC_V1_V2_CONFIG2_INT)) ;
/* Reset interrupt flag */ - tmp = readw(&nfc->config2); - tmp &= ~NFC_INT; - writew(tmp, &nfc->config2); + tmp = readnfc(&nfc->config2); + tmp &= ~NFC_V1_V2_CONFIG2_INT; + writenfc(tmp, &nfc->config2); }
static void nfc_nand_init(void) @@ -51,43 +51,45 @@ static void nfc_nand_init(void) int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512; int config1;
- writew(CONFIG_SYS_NAND_SPARE_SIZE / 2, &nfc->spare_area_size); + writenfc(CONFIG_SYS_NAND_SPARE_SIZE / 2, &nfc->spare_area_size);
/* unlocking RAM Buff */ - writew(0x2, &nfc->config); + writenfc(0x2, &nfc->config);
/* hardware ECC checking and correct */ - config1 = readw(&nfc->config1) | NFC_ECC_EN | NFC_INT_MSK | - NFC_ONE_CYCLE | NFC_FP_INT; + config1 = readnfc(&nfc->config1) | NFC_V1_V2_CONFIG1_ECC_EN | + NFC_V1_V2_CONFIG1_INT_MSK | NFC_V2_CONFIG1_ONE_CYCLE | + NFC_V2_CONFIG1_FP_INT; /* * if spare size is larger that 16 bytes per 512 byte hunk * then use 8 symbol correction instead of 4 */ if (CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page > 16) - config1 &= ~NFC_4_8N_ECC; + config1 &= ~NFC_V2_CONFIG1_ECC_MODE_4; else - config1 |= NFC_4_8N_ECC; - writew(config1, &nfc->config1); + config1 |= NFC_V2_CONFIG1_ECC_MODE_4; + writenfc(config1, &nfc->config1); #elif defined(MXC_NFC_V1) /* unlocking RAM Buff */ - writew(0x2, &nfc->config); + writenfc(0x2, &nfc->config);
/* hardware ECC checking and correct */ - writew(NFC_ECC_EN | NFC_INT_MSK, &nfc->config1); + writenfc(NFC_V1_V2_CONFIG1_ECC_EN | NFC_V1_V2_CONFIG1_INT_MSK, + &nfc->config1); #endif }
static void nfc_nand_command(unsigned short command) { - writew(command, &nfc->flash_cmd); - writew(NFC_CMD, &nfc->config2); + writenfc(command, &nfc->flash_cmd); + writenfc(NFC_CMD, &nfc->operation); nfc_wait_ready(); }
static void nfc_nand_address(unsigned short address) { - writew(address, &nfc->flash_addr); - writew(NFC_ADDR, &nfc->config2); + writenfc(address, &nfc->flash_addr); + writenfc(NFC_ADDR, &nfc->operation); nfc_wait_ready(); }
@@ -121,8 +123,8 @@ static void nfc_nand_data_output(void) int i; #endif
- writew(0, &nfc->buf_addr); - writew(NFC_OUTPUT, &nfc->config2); + writenfc(0, &nfc->buf_addr); + writenfc(NFC_OUTPUT, &nfc->operation); nfc_wait_ready(); #ifdef NAND_MXC_2K_MULTI_CYCLE /* @@ -130,8 +132,8 @@ static void nfc_nand_data_output(void) * for pages larger than 512 bytes. */ for (i = 1; i < CONFIG_SYS_NAND_PAGE_SIZE / 512; i++) { - writew(i, &nfc->buf_addr); - writew(NFC_OUTPUT, &nfc->config2); + writenfc(i, &nfc->buf_addr); + writenfc(NFC_OUTPUT, &nfc->operation); nfc_wait_ready(); } #endif @@ -160,7 +162,8 @@ static int nfc_nand_check_ecc(void)
static void nfc_nand_read_page(unsigned int page_address) { - writew(0, &nfc->buf_addr); /* read in first 0 buffer */ + /* read in first 0 buffer */ + writenfc(0, &nfc->buf_addr); nfc_nand_command(NAND_CMD_READ0); nfc_nand_page_address(page_address);