CC Fabio:
On 16/12/2013 23:44, Otavio Salvador wrote:
This reads the kernel, ftd and boot into ubifs filesystem. While on that, the SD firmware filename definition has been moved next to the other SD related commands.
Signed-off-by: Otavio Salvador otavio@ossystems.com.br
Changes in v3: None Changes in v2: None
include/configs/mx28evk.h | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index 3de0599..6c9fa00 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -162,7 +162,6 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "update_nand_full_filename=u-boot.nand\0" \ "update_nand_firmware_filename=u-boot.sb\0" \
- "update_sd_firmware_filename=u-boot.sd\0" \ "update_nand_firmware_maxsz=0x100000\0" \ "update_nand_stride=0x40\0" /* MX28 datasheet ch. 12.12 */ \ "update_nand_count=0x4\0" /* MX28 datasheet ch. 12.12 */ \
@@ -190,6 +189,23 @@ "nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \ "nand write ${loadaddr} ${fw_off} ${filesize} ; " \ "fi\0" \
- "nandargs=setenv bootargs console=${console_mainline},${baudrate} " \
"rootfstype=ubifs ubi.mtd=6 root=ubi0_0 ${mtdparts}\0" \- "nandboot=" /* Boot from NAND */ \
"mtdparts default; " \"run nandargs; " \"nand read ${loadaddr} kernel 0x00400000; " \"if test ${boot_fdt} = yes; then " \"nand read ${fdt_addr} fdt 0x00080000; " \"bootm ${loadaddr} - ${fdt_addr}; " \"else " \"if test ${boot_fdt} = no; then " \"bootm; " \"else " \"echo \"ERROR: Set boot_fdt to yes or no.\"; " \"fi; " \"fi\0" \- "update_sd_firmware_filename=u-boot.sd\0" \ "update_sd_firmware=" /* Update the SD firmware partition */ \ "if mmc rescan ; then " \ "if tftp ${update_sd_firmware_filename} ; then " \
Again, I will not block patches if we have not (yet) another solution.
Best regards, Stefano Babic