The same sequence is used in several places, so move it into a function. Note that UART_LCR_BKSE is an alias for UART_LCR_DLAB.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v5: None Changes in v4: None Changes in v3: - Add new patch to collect common baud rate code in ns16550
Changes in v2: None
drivers/serial/ns16550.c | 33 +++++++++++++-------------------- 1 file changed, 13 insertions(+), 20 deletions(-)
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 3f5f4ef..d54eba6 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -61,6 +61,14 @@ int ns16550_calc_divisor(NS16550_t port, int clock, int baudrate) return DIV_ROUND_CLOSEST(clock, mode_x_div * baudrate); }
+static void NS16550_setbrg(NS16550_t com_port, int baud_divisor) +{ + serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr); + serial_out(baud_divisor & 0xff, &com_port->dll); + serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm); + serial_out(UART_LCRVAL, &com_port->lcr); +} + void NS16550_init(NS16550_t com_port, int baud_divisor) { #if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_OMAP34XX)) @@ -71,10 +79,7 @@ void NS16550_init(NS16550_t com_port, int baud_divisor) */ if ((serial_in(&com_port->lsr) & (UART_LSR_TEMT | UART_LSR_THRE)) == UART_LSR_THRE) { - serial_out(UART_LCR_DLAB, &com_port->lcr); - serial_out(baud_divisor & 0xff, &com_port->dll); - serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm); - serial_out(UART_LCRVAL, &com_port->lcr); + NS16550_setbrg(com_port, baud_divisor); serial_out(0, &com_port->mdr1); } #endif @@ -87,16 +92,10 @@ void NS16550_init(NS16550_t com_port, int baud_divisor) defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX) serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/ #endif - serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr); - serial_out(0, &com_port->dll); - serial_out(0, &com_port->dlm); - serial_out(UART_LCRVAL, &com_port->lcr); + NS16550_setbrg(com_port, 0); serial_out(UART_MCRVAL, &com_port->mcr); serial_out(UART_FCRVAL, &com_port->fcr); - serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr); - serial_out(baud_divisor & 0xff, &com_port->dll); - serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm); - serial_out(UART_LCRVAL, &com_port->lcr); + NS16550_setbrg(com_port, baud_divisor); #if defined(CONFIG_OMAP) || \ defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \ defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX) @@ -113,16 +112,10 @@ void NS16550_init(NS16550_t com_port, int baud_divisor) void NS16550_reinit(NS16550_t com_port, int baud_divisor) { serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier); - serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr); - serial_out(0, &com_port->dll); - serial_out(0, &com_port->dlm); - serial_out(UART_LCRVAL, &com_port->lcr); + NS16550_setbrg(com_port, 0); serial_out(UART_MCRVAL, &com_port->mcr); serial_out(UART_FCRVAL, &com_port->fcr); - serial_out(UART_LCR_BKSE, &com_port->lcr); - serial_out(baud_divisor & 0xff, &com_port->dll); - serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm); - serial_out(UART_LCRVAL, &com_port->lcr); + NS16550_setbrg(com_port, baud_divisor); } #endif /* CONFIG_NS16550_MIN_FUNCTIONS */