From: Quentin Schulz quentin.schulz@theobroma-systems.com
This migrates the plaintext README in board/theobroma-systems/puma_rk3399 to doc/board/theobroma-systems and while doing so, update the instructions and rewrite it in rST.
Cc: Quentin Schulz foss+uboot@0leil.net Reviewed-by: Kever Yang kever.yang@rock-chips.com Signed-off-by: Quentin Schulz quentin.schulz@theobroma-systems.com --- board/theobroma-systems/puma_rk3399/MAINTAINERS | 1 + board/theobroma-systems/puma_rk3399/README | 90 +---------------- doc/board/theobroma-systems/index.rst | 1 + doc/board/theobroma-systems/puma_rk3399.rst | 126 ++++++++++++++++++++++++ 4 files changed, 129 insertions(+), 89 deletions(-)
diff --git a/board/theobroma-systems/puma_rk3399/MAINTAINERS b/board/theobroma-systems/puma_rk3399/MAINTAINERS index 23701b3f0ed..7e84a5be262 100644 --- a/board/theobroma-systems/puma_rk3399/MAINTAINERS +++ b/board/theobroma-systems/puma_rk3399/MAINTAINERS @@ -4,6 +4,7 @@ M: Klaus Goger klaus.goger@theobroma-systems.com S: Maintained F: board/theobroma-systems/puma_rk3399 F: board/theobroma-systems/common +F: doc/board/theobroma-systems F: include/configs/puma_rk3399.h F: arch/arm/dts/rk3399-puma* F: configs/puma-rk3399_defconfig diff --git a/board/theobroma-systems/puma_rk3399/README b/board/theobroma-systems/puma_rk3399/README index 649aa3c543d..39c9d618866 100644 --- a/board/theobroma-systems/puma_rk3399/README +++ b/board/theobroma-systems/puma_rk3399/README @@ -1,89 +1 @@ -Introduction -============ - -The RK3399-Q7 (Puma) is a system-on-module featuring the Rockchip -RK3399 in a Qseven-compatible form-factor. - -RK3399-Q7 features: - * CPU: ARMv8 64bit Big-Little architecture, - * Big: dual-core Cortex-A72 - * Little: quad-core Cortex-A53 - * IRAM: 200KB - * DRAM: 4GB-128MB dual-channel - * eMMC: onboard eMMC - * SD/MMC - * GbE (onboard Micrel KSZ9031) Gigabit ethernet PHY - * USB: - * USB3.0 dual role port - * 2x USB3.0 host, 1x USB2.0 host via onboard USB3.0 hub - * Display: HDMI/eDP/MIPI - * Camera: 2x CSI (one on the edge connector, one on the Q7 specified CSI ZIF) - * NOR Flash: onboard SPI NOR - * Companion Controller: onboard additional Cortex-M0 microcontroller - * RTC - * fan controller - * CAN - -Here is the step-by-step to boot to U-Boot on rk3399. - -Get the Source and build ATF binary -=================================== - - > git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git - -Compile the ATF -=============== - - > cd trusted-firmware-a - > make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31 - > cp build/rk3399/release/bl31/bl31.elf ../u-boot/bl31.elf - -Compile the U-Boot -================== - - > cd ../u-boot - > make CROSS_COMPILE=aarch64-linux-gnu- puma-rk3399_defconfig all - -Flash the image -=============== - -Copy u-boot-rockchip.bin to offset 32k for SD/eMMC. -Copy u-boot-rockchip-spi.bin to offset 0 for NOR-flash. - -SD-Card -------- - - > dd if=u-boot-rockchip.bin of=/dev/sdb seek=64 - -eMMC ----- - -rkdeveloptool allows to flash the on-board eMMC via the USB OTG interface with -help of the Rockchip loader binary. - - > git clone https://github.com/rockchip-linux/rkdeveloptool - > cd rkdeveloptool - > autoreconf -i && ./configure && make - > git clone https://github.com/rockchip-linux/rkbin.git - > cd rkbin - > ./tools/boot_merger RKBOOT/RK3399MINIALL.ini - > cd .. - > ./rkdeveloptool db rkbin/rk3399_loader_v1.25.126.bin - > ./rkdeveloptool wl 64 ../u-boot-rockchip.bin - -NOR-Flash ---------- - -rkdeveloptool allows to flash the on-board SPI via the USB OTG interface with -help of the Rockchip loader binary. - - > git clone https://github.com/rockchip-linux/rkdeveloptool - > cd rkdeveloptool - > autoreconf -i && ./configure && make - > git clone https://github.com/rockchip-linux/rkbin.git - > cd rkbin - > ./tools/boot_merger RKBOOT/RK3399MINIALL_SPINOR.ini - > cd .. - > ./rkdeveloptool db rkbin/rk3399_loader_spinor_v1.25.114.bin - > ./rkdeveloptool ef - > ./rkdeveloptool wl 0 ../u-boot-rockchip-spi.bin +See doc/board/theobroma-systems/puma_rk3399.rst. diff --git a/doc/board/theobroma-systems/index.rst b/doc/board/theobroma-systems/index.rst index 945f7a2f976..0720128ad52 100644 --- a/doc/board/theobroma-systems/index.rst +++ b/doc/board/theobroma-systems/index.rst @@ -7,3 +7,4 @@ Theobroma Systems :maxdepth: 2
jaguar_rk3588 + puma_rk3399 diff --git a/doc/board/theobroma-systems/puma_rk3399.rst b/doc/board/theobroma-systems/puma_rk3399.rst new file mode 100644 index 00000000000..5bc6385e451 --- /dev/null +++ b/doc/board/theobroma-systems/puma_rk3399.rst @@ -0,0 +1,126 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +RK3399-Q7 Puma +============== + +The RK3399-Q7 (Puma) is a system-on-module featuring the Rockchip +RK3399 in a Qseven-compatible form-factor. + +RK3399-Q7 features: + + * CPU: ARMv8 64bit Big-Little architecture, + + * Big: dual-core Cortex-A72 + * Little: quad-core Cortex-A53 + * IRAM: 200KB + * DRAM: 4GB-128MB dual-channel + + * eMMC: onboard eMMC + * SD/MMC + * GbE (onboard Micrel KSZ9031) Gigabit ethernet PHY + * USB: + + * USB3.0 dual role port + * 2x USB3.0 host, 1x USB2.0 host via onboard USB3.0 hub + + * Display: HDMI/eDP/MIPI + * Camera: 2x CSI (one on the edge connector, one on the Q7 specified CSI ZIF) + * NOR Flash: onboard SPI NOR + * Companion Controller: onboard additional Cortex-M0 microcontroller + * RTC + * fan controller + * CAN + +Here is the step-by-step to boot to U-Boot on RK3399-Q7 from Theobroma Systems. + +Get the Source and build ATF binary +----------------------------------- + +.. prompt:: bash + + git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git + cd trusted-firmware-a + make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31 + export BL31=$PWD/build/rk3399/release/bl31/bl31.elf + +Compile the U-Boot +------------------ + +.. prompt:: bash + + cd ../u-boot + make CROSS_COMPILE=aarch64-linux-gnu- puma-rk3399_defconfig all + +This will build ``u-boot-rockchip.bin`` which can be written to an MMC device +(eMMC or SD card), and ``u-boot-rockchip-spi.bin`` which can be written to the +SPI-NOR flash. + +Flash the image +--------------- + +Copy ``u-boot-rockchip.bin`` to offset 32k for SD/eMMC. +Copy ``u-boot-rockchip-spi.bin`` to offset 0 for NOR-flash. + +SD-Card +~~~~~~~ + +.. prompt:: bash + + dd if=u-boot-rockchip.bin of=/dev/sdX seek=64 + +.. note:: + + Replace ``/dev/sdX`` to match your SD card kernel device. + +eMMC +~~~~ + +``rkdeveloptool`` allows to flash the on-board eMMC via the USB OTG interface +with help of the Rockchip loader binary. + +To enter the USB flashing mode on Haikou baseboard, remove any SD card, insert a +micro-USB cable in the ``Q7 USB P1`` connector (P8), move ``SW5`` switch into +``BIOS Disable`` mode, power cycle or reset the board and move ``SW5`` switch +back to ``Normal Boot`` mode. A new USB device should have appeared on your PC +(check with ``lsusb -d 2207:330c``). + +To flash U-Boot on the eMMC with ``rkdeveloptool``: + +.. prompt:: bash + + git clone https://github.com/rockchip-linux/rkdeveloptool + cd rkdeveloptool + autoreconf -i && CPPFLAGS=-Wno-format-truncation ./configure && make + git clone https://github.com/rockchip-linux/rkbin.git + cd rkbin + ./tools/boot_merger RKBOOT/RK3399MINIALL.ini + cd .. + ./rkdeveloptool db rkbin/rk3399_loader_v1.30.130.bin + ./rkdeveloptool wl 64 ../u-boot-rockchip.bin + +NOR-Flash +~~~~~~~~~ + +``rkdeveloptool`` allows to flash the on-board SPI via the USB OTG interface with +help of the Rockchip loader binary. + +To enter the USB flashing mode on Haikou baseboard, remove any SD card, insert a +micro-USB cable in the ``Q7 USB P1`` connector (P8), move ``SW5`` switch into +``BIOS Disable`` mode, power cycle or reset the board and move ``SW5`` switch +back to ``Normal Boot`` mode. A new USB device should have appeared on your PC +(check with ``lsusb -d 2207:330c``). + +To flash U-Boot on the SPI with ``rkdeveloptool``: + +.. prompt:: bash + + git clone https://github.com/rockchip-linux/rkdeveloptool + cd rkdeveloptool + autoreconf -i && CPPFLAGS=-Wno-format-truncation ./configure && make + git clone https://github.com/rockchip-linux/rkbin.git + cd rkbin + ./tools/boot_merger RKBOOT/RK3399MINIALL_SPINOR.ini + cd .. + ./rkdeveloptool db rkbin/rk3399_loader_spinor_v1.30.114.bin + ./rkdeveloptool ef + ./rkdeveloptool wl 0 ../u-boot-rockchip-spi.bin