Hi,
On 18-01-15 12:33, Siarhei Siamashka wrote:
On Tue, 13 Jan 2015 13:33:32 +0100 Hans de Goede hdegoede@redhat.com wrote:
While running some tests with an Olinuxino-A13-Micro + a 7" Olimex LCD module I noticed that the screen flickered. This is caused by the lcd display clk phase reg value being set to 0, where it should be 1 in this setup.
This commit adds a Kconfig option for the lcd display clk phase, so that we can set it per board. This defaults to 1, because looking at all the fex files in sunxi-boards, that is by far the most used value.
What is the name of this option in fex files?
Good question on sun4i / sun5i / sun7i it is stored in lcd_io_cfg0 but as a raw register value, rather then the clk phase value, so you need to shift right by 28 to get the actual value, e.g.:
lcd_io_cfg0 = 268435456
Means (0x10000000 >> 28) == 1
On sun6i / sun8i it is not clear, the allwinner kernel code uses lcd_hv_clk_phase which gets converted to an actual register value in a complicated method unfortunately, see the allwinner kernel sources.
Where as the fex files seem to use lcd_io_phase which is not used by the kernel AFAICT ...
Looking at the register values used under android it just seems to end up being 0 on sun6i / sun8i.
Regards,
Hans