Hi Mario,
On 14 July 2017 at 05:55, Mario Six mario.six@gdsys.cc wrote:
Add a comman to debug the IHS FPGA's bus.
Signed-off-by: Mario Six mario.six@gdsys.cc
cmd/Kconfig | 5 ++ cmd/Makefile | 1 + cmd/ihs_fpga.c | 269 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 275 insertions(+) create mode 100644 cmd/ihs_fpga.c
This should be more generic as per the driver - e.g. a read/write() method that supports an access size parameter.
Is there any way we can make some of the code common with things like 'md'?
diff --git a/cmd/Kconfig b/cmd/Kconfig index 4bbe9d435c..6d13c681cb 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -753,6 +753,11 @@ config CMD_SATA Attachment, where AT refers to an IBM AT (Advanced Technology) computer released in 1984.
+config CMD_IHS_FPGA
bool "fpga"helpEnable the GDSYS IHS FPGA command for accessing the FPGA's regisers.
Regards, Simon