Hi Haikun,
On 3/25/2015 8:35 PM, Haikun Wang wrote:
From: Haikun Wang Haikun.Wang@freescale.com
Atmel AT45DB series devices commands is different from common spi flash commands. This patch add support for AT45DB special commands. Add a flag AT45DB_CMD to control whether use those commands.
Signed-off-by: Haikun Wang Haikun.Wang@freescale.com
Changes in v1: None
drivers/mtd/spi/sf_internal.h | 7 +++++++ drivers/mtd/spi/sf_ops.c | 2 +- drivers/mtd/spi/sf_probe.c | 10 ++++++++++ 3 files changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h index 785f7a9..234af21 100644 --- a/drivers/mtd/spi/sf_internal.h +++ b/drivers/mtd/spi/sf_internal.h @@ -43,6 +43,7 @@ enum { SST_BP = 1 << 3, SST_WP = 1 << 4, WR_QPP = 1 << 5,
AT45DB_CMD = 1 << 6, };
#define SST_WR (SST_BP | SST_WP)
@@ -106,6 +107,12 @@ enum { #define SPI_FLASH_PAGE_ERASE_TIMEOUT (5 * CONFIG_SYS_HZ) #define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CONFIG_SYS_HZ)
+/* Atmel AT45DB specific */ +#define CMD_ATMEL_PAGE_PROGRAM 0x82
Why not use 0x2 to align with current mtd/spi framework?
+#define CMD_ATMEL_READ_STATUS 0xd7 +#define CMD_ATMEL_FLAG_STATUS 0xd7 +#define CMD_ATMEL_BLK_ERASE 0x50
- /* SST specific */ #ifdef CONFIG_SPI_FLASH_SST # define CMD_SST_BP 0x02 /* Byte Program */
diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c index 34bc54e..27ce5f9 100644 --- a/drivers/mtd/spi/sf_ops.c +++ b/drivers/mtd/spi/sf_ops.c @@ -165,7 +165,7 @@ int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout) u8 poll_bit = STATUS_WIP; u8 cmd = flash->poll_cmd;
- if (cmd == CMD_FLAG_STATUS) {
- if (cmd == CMD_FLAG_STATUS || cmd == CMD_ATMEL_FLAG_STATUS) { poll_bit = STATUS_PEC; check_status = poll_bit; }
diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c index 4103723..2ccddf2 100644 --- a/drivers/mtd/spi/sf_probe.c +++ b/drivers/mtd/spi/sf_probe.c @@ -226,6 +226,16 @@ static int spi_flash_validate_params(struct spi_slave *spi, u8 *idcode, flash->poll_cmd = CMD_FLAG_STATUS; #endif
+#ifdef CONFIG_SPI_FLASH_ATMEL
- if (params->flags & AT45DB_CMD) {
flash->poll_cmd = CMD_ATMEL_READ_STATUS;flash->write_cmd = CMD_ATMEL_PAGE_PROGRAM;/* use block-erase command, eight pages */flash->erase_cmd = CMD_ATMEL_BLK_ERASE;flash->erase_size = flash->page_size * 8;- }
+#endif
The SPI Flash's default page size is 264 bytes, but mtd/spi framework supports 256 and 512 bytes for one page. In your patch, you does not handle such case, can your driver works as expected?
/* Configure the BAR - discover bank cmds and read current bank */ #ifdef CONFIG_SPI_FLASH_BAR u8 curr_bank = 0;
Regards, Peng.