It turns out that several SoCs share same mmc configuration as H6. In order to lower ifdef clutter replace H6 specific macro with common one.
Signed-off-by: Jernej Skrabec jernej.skrabec@siol.net --- arch/arm/include/asm/arch-sunxi/mmc.h | 2 +- drivers/mmc/sunxi_mmc.c | 12 ++++++------ 2 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h index f2deafddd202..340e25b04d2a 100644 --- a/arch/arm/include/asm/arch-sunxi/mmc.h +++ b/arch/arm/include/asm/arch-sunxi/mmc.h @@ -45,7 +45,7 @@ struct sunxi_mmc { u32 chda; /* 0x90 */ u32 cbda; /* 0x94 */ u32 res2[26]; -#if defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_MACH_SUN50I_H6) +#if defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_SUN50I_GEN_H6) u32 res3[17]; u32 samp_dl; u32 res4[46]; diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c index 0e03b07ce555..3767a39277c1 100644 --- a/drivers/mmc/sunxi_mmc.c +++ b/drivers/mmc/sunxi_mmc.c @@ -122,7 +122,7 @@ static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz) if (IS_ENABLED(CONFIG_MACH_SUN8I_A83T) && priv->mmc_no != 2) new_mode = false;
-#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN50I_H6) +#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_SUN50I_GEN_H6) calibrate = true; #endif
@@ -133,7 +133,7 @@ static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz) #ifdef CONFIG_MACH_SUN9I pll = CCM_MMC_CTRL_PLL_PERIPH0; pll_hz = clock_get_pll4_periph0(); -#elif defined(CONFIG_MACH_SUN50I_H6) +#elif defined(CONFIG_SUN50I_GEN_H6) pll = CCM_MMC_CTRL_PLL6X2; pll_hz = clock_get_pll6() * 2; #else @@ -249,7 +249,7 @@ static int mmc_config_clock(struct sunxi_mmc_priv *priv, struct mmc *mmc) rval &= ~SUNXI_MMC_CLK_DIVIDER_MASK; writel(rval, &priv->reg->clkcr);
-#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN50I_H6) +#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_SUN50I_GEN_H6) /* A64 supports calibration of delays on MMC controller and we * have to set delay of zero before starting calibration. * Allwinner BSP driver sets a delay only in the case of @@ -530,7 +530,7 @@ struct mmc *sunxi_mmc_init(int sdc_no)
cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; cfg->host_caps = MMC_MODE_4BIT; -#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN8I) || defined(CONFIG_MACH_SUN50I_H6) +#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN8I) || defined(CONFIG_SUN50I_GEN_H6) if (sdc_no == 2) cfg->host_caps = MMC_MODE_8BIT; #endif @@ -545,7 +545,7 @@ struct mmc *sunxi_mmc_init(int sdc_no)
/* config ahb clock */ debug("init mmc %d clock and io\n", sdc_no); -#if !defined(CONFIG_MACH_SUN50I_H6) +#if !defined(CONFIG_SUN50I_GEN_H6) setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MMC(sdc_no));
#ifdef CONFIG_SUNXI_GEN_SUN6I @@ -557,7 +557,7 @@ struct mmc *sunxi_mmc_init(int sdc_no) writel(SUNXI_MMC_COMMON_CLK_GATE | SUNXI_MMC_COMMON_RESET, SUNXI_MMC_COMMON_BASE + 4 * sdc_no); #endif -#else /* CONFIG_MACH_SUN50I_H6 */ +#else /* CONFIG_SUN50I_GEN_H6 */ setbits_le32(&ccm->sd_gate_reset, 1 << sdc_no); /* unassert reset */ setbits_le32(&ccm->sd_gate_reset, 1 << (RESET_SHIFT + sdc_no));