The clk_init_uart() helper always returns 0, but we're meant to return a real clock rate. Given that we hardcode 115200 baud, just return the clock rate that we set.
Signed-off-by: Caleb Connolly caleb.connolly@linaro.org --- drivers/clk/qcom/clock-apq8016.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/qcom/clock-apq8016.c b/drivers/clk/qcom/clock-apq8016.c index 5a5868169c89..6210fba87984 100644 --- a/drivers/clk/qcom/clock-apq8016.c +++ b/drivers/clk/qcom/clock-apq8016.c @@ -99,10 +99,10 @@ static ulong apq8016_clk_set_rate(struct clk *clk, ulong rate) case GCC_SDCC2_APPS_CLK: /* SDC2 */ return clk_init_sdc(priv, 1, rate); break; case GCC_BLSP1_UART2_APPS_CLK: /* UART2 */ - return apq8016_clk_init_uart(priv->base); - break; + apq8016_clk_init_uart(priv->base); + return 7372800; default: return 0; } }