On Mon, Feb 13, 2017 at 11:44:57AM +0100, Axel Haslam wrote:
The uboot binary on the AIS file starts at offset 0x8000. This would be sector 0x40 on a mmc card with 512 bytes per sector: 0x8000/0x200 = 0x40.
But because we usually skip the first mmc sector to preserve the partition table, the ais image is written starting on sector 0x1, and the u-boot binary ends up at sector 0x41.
Set the address of the u-boot binary to 0x41 so that spl can correctly jump to it.
Signed-off-by: Axel Haslam ahaslam@baylibre.com
configs/omapl138_lcdk_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig index d20af19..a249ebd 100644 --- a/configs/omapl138_lcdk_defconfig +++ b/configs/omapl138_lcdk_defconfig @@ -12,7 +12,7 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xb5 +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x41
Since we're changing a default here, and one that will lead to non-booting boards if you don't notice, where did the old value come from, and is it actually in use anywhere? Thanks!