On Tue Jul 03, 2012 at 12:54:04AM +0530, Sughosh Ganu wrote:
hi, While testing on hawkboard with the latest commit, i hit an issue of commands not being accepted.
hawkboard > reset Unknown command '�����' - try 'help' hawkboard >
Running git bisect showed that this is caused due to commit 054ea170f271: cmd_mem: cmp: unify size code paths. Has anyone seen this issue -- i don't think this is board/arch specific.
I was trying to debug the issue, and i found different behaviour with different toolchains.
Codesourcery(gcc - 4.5.2, binutils - 2.20.51)
With commit 211e47549b668c7, which is the top of master, i don't hit the issue anymore.
ELDK-5.2(gcc - 4.6.4, binutils - 2.22)
With this toolchain, i never hit the issue. But enabling DEBUG in board.c, i get a hang after nand initialisation. I am not able to use debug messages, as the board starts to boot with inclusion of even a single debug message.
I am not sure now if this is something specific to my board, as i see different results with different toolchains. It'd be great if this change(DEBUG enabled in board.c with an eldk toolchain) can be checked on other boards(preferably davinci boards). Thanks.
-sughosh