Hi,
I'm having problems with my bootscript which works on 2018.03 but is having problems on latest master. I need to run `mmc part` to get it working.
U-Boot 2019.01-rc1-00337-g42cc2cf (Dec 16 2018 - 01:02:22 +0100) Model: Toradex Apalis iMX6 Quad 2GB IT V1.1A, Serial# 04875944
# mmc dev 0 switch to partitions #0, OK mmc0(part 0) is current device
# load mmc 0:1 ${loadaddr} ${script} ** No partition table - mmc 0 **
# mmc part
Partition Map for MMC device 0 -- Partition Type: DOS
Part Start Sector Num Sectors UUID Type 1 2048 32768 5452574f-01 83 Boot 2 36864 524288 5452574f-02 83a
# load mmc 0:1 ${loadaddr} ${script} 641 bytes read in 26 ms (23.4 KiB/s)
Same problem with `ext4ls`:
# mmc dev 0 switch to partitions #0, OK mmc0(part 0) is current device # ext4ls mmc 0:1 ** No partition table - mmc 0 ** # mmc part Partition Map for MMC device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 2048 32768 5452574f-01 83 Boot 2 36864 524288 5452574f-02 83
# ext4ls mmc 0:1 <DIR> 4096 . <DIR> 4096 .. <DIR> 4096 lost+found 641 boot.scr 47312 imx6q-apalis-ixora.dtb 2521736 uImage
-- ynezz