The current init operation also sets the PHY into USB host mode. Split the mode configuration into set_mode callback instead and implement support for device and OTG modes as well.
The OTG mode performs auto-detection and selects either host or device mode. In case the OTG mode is configured, submode field can be used to select full PHY (re)initialization or only mode auto-detection. The full (re)initialization is only necessary once, on start up.
Since the OTG mode may enable IRQ generation in the PHY, disable that IRQ generation in the exit callback again.
Signed-off-by: Marek Vasut marek.vasut+renesas@mailbox.org --- Cc: Caleb Connolly caleb.connolly@linaro.org Cc: Fabio Estevam festevam@gmail.com Cc: Fabrice Gasnier fabrice.gasnier@foss.st.com Cc: Jonas Karlman jonas@kwiboo.se Cc: Mathieu Othacehe othacehe@gnu.org Cc: Mattijs Korpershoek mkorpershoek@baylibre.com Cc: Neil Armstrong neil.armstrong@linaro.org Cc: Nishanth Menon nm@ti.com Cc: Nobuhiro Iwamatsu iwamatsu@nigauri.org Cc: Sean Anderson seanga2@gmail.com Cc: Simon Glass sjg@chromium.org Cc: Sumit Garg sumit.garg@linaro.org Cc: Tim Harvey tharvey@gateworks.com Cc: Tom Rini trini@konsulko.com Cc: Xavier Drudis Ferran xdrudis@tinet.cat Cc: u-boot-qcom@groups.io Cc: u-boot@lists.denx.de --- V2: No change --- drivers/phy/phy-rcar-gen3.c | 90 ++++++++++++++++++++++++++++++++++--- 1 file changed, 85 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/phy-rcar-gen3.c b/drivers/phy/phy-rcar-gen3.c index 7c292cae0e2..b278f995f37 100644 --- a/drivers/phy/phy-rcar-gen3.c +++ b/drivers/phy/phy-rcar-gen3.c @@ -8,6 +8,7 @@ #include <clk.h> #include <div64.h> #include <dm.h> +#include <dm/device_compat.h> #include <fdtdec.h> #include <generic-phy.h> #include <malloc.h> @@ -31,8 +32,13 @@ #define USB2_LINECTRL1 0x610 #define USB2_ADPCTRL 0x630
+/* INT_ENABLE */ +#define USB2_INT_ENABLE_UCOM_INTEN BIT(3) +#define USB2_INT_ENABLE_USBH_INTB_EN BIT(2) +#define USB2_INT_ENABLE_USBH_INTA_EN BIT(1) + /* USBCTR */ -#define USB2_USBCTR_PLL_RST BIT(1) +#define USB2_USBCTR_PLL_RST BIT(1)
/* SPD_RSM_TIMSET */ #define USB2_SPD_RSM_TIMSET_INIT 0x014e029b @@ -43,11 +49,23 @@ /* COMMCTRL */ #define USB2_COMMCTRL_OTG_PERI BIT(31) /* 1 = Peripheral mode */
+/* OBINTSTA and OBINTEN */ +#define USB2_OBINT_SESSVLDCHG BIT(12) +#define USB2_OBINT_IDDIGCHG BIT(11) + +/* VBCTRL */ +#define USB2_VBCTRL_DRVVBUSSEL BIT(8) + /* LINECTRL1 */ +#define USB2_LINECTRL1_DPRPD_EN BIT(19) #define USB2_LINECTRL1_DP_RPD BIT(18) +#define USB2_LINECTRL1_DMRPD_EN BIT(17) #define USB2_LINECTRL1_DM_RPD BIT(16)
/* ADPCTRL */ +#define USB2_ADPCTRL_OTGSESSVLD BIT(20) +#define USB2_ADPCTRL_IDDIG BIT(19) +#define USB2_ADPCTRL_IDPULLUP BIT(5) /* 1 = ID sampling is enabled */ #define USB2_ADPCTRL_DRVVBUS BIT(4)
struct rcar_gen3_phy { @@ -65,12 +83,14 @@ static int rcar_gen3_phy_phy_init(struct phy *phy) writel(USB2_SPD_RSM_TIMSET_INIT, priv->regs + USB2_SPD_RSM_TIMSET); writel(USB2_OC_TIMSET_INIT, priv->regs + USB2_OC_TIMSET);
- setbits_le32(priv->regs + USB2_LINECTRL1, - USB2_LINECTRL1_DP_RPD | USB2_LINECTRL1_DM_RPD); + return 0; +}
- clrbits_le32(priv->regs + USB2_COMMCTRL, USB2_COMMCTRL_OTG_PERI); +static int rcar_gen3_phy_phy_exit(struct phy *phy) +{ + struct rcar_gen3_phy *priv = dev_get_priv(phy->dev);
- setbits_le32(priv->regs + USB2_ADPCTRL, USB2_ADPCTRL_DRVVBUS); + writel(0, priv->regs + USB2_INT_ENABLE);
return 0; } @@ -102,10 +122,70 @@ static int rcar_gen3_phy_phy_power_off(struct phy *phy) return regulator_set_enable(priv->vbus_supply, false); }
+static int rcar_gen3_phy_phy_set_mode(struct phy *phy, enum phy_mode mode, + int submode) +{ + const u32 adpdevmask = USB2_ADPCTRL_IDDIG | USB2_ADPCTRL_OTGSESSVLD; + struct rcar_gen3_phy *priv = dev_get_priv(phy->dev); + u32 adpctrl; + + if (mode == PHY_MODE_USB_OTG) { + if (submode) { + /* OTG submode is used as initialization indicator */ + writel(USB2_INT_ENABLE_UCOM_INTEN | + USB2_INT_ENABLE_USBH_INTB_EN | + USB2_INT_ENABLE_USBH_INTA_EN, + priv->regs + USB2_INT_ENABLE); + setbits_le32(priv->regs + USB2_VBCTRL, + USB2_VBCTRL_DRVVBUSSEL); + writel(USB2_OBINT_SESSVLDCHG | USB2_OBINT_IDDIGCHG, + priv->regs + USB2_OBINTSTA); + setbits_le32(priv->regs + USB2_OBINTEN, + USB2_OBINT_SESSVLDCHG | + USB2_OBINT_IDDIGCHG); + setbits_le32(priv->regs + USB2_ADPCTRL, + USB2_ADPCTRL_IDPULLUP); + clrsetbits_le32(priv->regs + USB2_LINECTRL1, + USB2_LINECTRL1_DP_RPD | + USB2_LINECTRL1_DM_RPD | + USB2_LINECTRL1_DPRPD_EN | + USB2_LINECTRL1_DMRPD_EN, + USB2_LINECTRL1_DPRPD_EN | + USB2_LINECTRL1_DMRPD_EN); + } + + adpctrl = readl(priv->regs + USB2_ADPCTRL); + if ((adpctrl & adpdevmask) == adpdevmask) + mode = PHY_MODE_USB_DEVICE; + else + mode = PHY_MODE_USB_HOST; + } + + if (mode == PHY_MODE_USB_HOST) { + clrbits_le32(priv->regs + USB2_COMMCTRL, USB2_COMMCTRL_OTG_PERI); + setbits_le32(priv->regs + USB2_LINECTRL1, + USB2_LINECTRL1_DP_RPD | USB2_LINECTRL1_DM_RPD); + setbits_le32(priv->regs + USB2_ADPCTRL, USB2_ADPCTRL_DRVVBUS); + } else if (mode == PHY_MODE_USB_DEVICE) { + setbits_le32(priv->regs + USB2_COMMCTRL, USB2_COMMCTRL_OTG_PERI); + clrsetbits_le32(priv->regs + USB2_LINECTRL1, + USB2_LINECTRL1_DP_RPD | USB2_LINECTRL1_DM_RPD, + USB2_LINECTRL1_DM_RPD); + clrbits_le32(priv->regs + USB2_ADPCTRL, USB2_ADPCTRL_DRVVBUS); + } else { + dev_err(phy->dev, "Unknown mode %d\n", mode); + return -EINVAL; + } + + return 0; +} + static const struct phy_ops rcar_gen3_phy_phy_ops = { .init = rcar_gen3_phy_phy_init, + .exit = rcar_gen3_phy_phy_exit, .power_on = rcar_gen3_phy_phy_power_on, .power_off = rcar_gen3_phy_phy_power_off, + .set_mode = rcar_gen3_phy_phy_set_mode, };
static int rcar_gen3_phy_probe(struct udevice *dev)