Dear smitha.vanga@wipro.com,
In message 07ACDFB8ECA8EF47863A613BC01BBB220344DD3F@HYD-MKD-MBX02.wipro.com you wrote:
I am trying to bring up WR linux 2.6.38.2 on a custom target board based on mpc8247, We are using SCC1 for the serial console. Have initialized the scc node in the dts as below. Had set the bootargs as setenv bootargs mem=64M console=ttyCPM,9600n8 root=/dev/ram rw. My serial console doesn't come up. Can you give any pointers to this would be of great help. I am stuck here and there is a project release. Below are the kernel logs I get for the Serial from the __log_buf.
This has nothing to do with U-Boot, so you are off topic here.
But before reposting the same question on a Linux related mailing list, please make sure to check your boot arguments. I huess your console device is not /dev/ttyCPM, but /dev/ttyCPM0 or /dev/ttyCPM1 or similar.
Best regards,
Wolfgang Denk