Add boot from SDMMC (sdcard) support for sam9x60_curiosity.
Signed-off-by: Durai Manickam KR durai.manickamkr@microchip.com --- board/atmel/sam9x60_curiosity/MAINTAINERS | 1 + configs/sam9x60_curiosity_mmc_defconfig | 82 +++++++++++++++++++++++ 2 files changed, 83 insertions(+) create mode 100644 configs/sam9x60_curiosity_mmc_defconfig
diff --git a/board/atmel/sam9x60_curiosity/MAINTAINERS b/board/atmel/sam9x60_curiosity/MAINTAINERS index 84a3a9f186..3e1dce2980 100644 --- a/board/atmel/sam9x60_curiosity/MAINTAINERS +++ b/board/atmel/sam9x60_curiosity/MAINTAINERS @@ -4,3 +4,4 @@ M: Eugen Hristev eugen.hristev@microchip.com S: Maintained F: board/atmel/sam9x60_curiosity/ F: include/configs/sam9x60_curiosity.h +F: configs/sam9x60_curiosity_mmc_defconfig diff --git a/configs/sam9x60_curiosity_mmc_defconfig b/configs/sam9x60_curiosity_mmc_defconfig new file mode 100644 index 0000000000..475f06a0c3 --- /dev/null +++ b/configs/sam9x60_curiosity_mmc_defconfig @@ -0,0 +1,82 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_ARCH_AT91=y +CONFIG_SYS_TEXT_BASE=0x23f00000 +CONFIG_SYS_MALLOC_LEN=0x81000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_TARGET_SAM9X60_CURIOSITY=y +CONFIG_ATMEL_LEGACY=y +CONFIG_NR_DRAM_BANKS=8 +CONFIG_ENV_SIZE=0x4000 +CONFIG_DM_GPIO=y +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_BASE=0xfffff200 +CONFIG_DEBUG_UART_CLOCK=200000000 +CONFIG_DEFAULT_DEVICE_TREE="at91-sam9x60_curiosity" +CONFIG_DEBUG_UART=y +CONFIG_SYS_LOAD_ADDR=0x22000000 +CONFIG_FIT=y +CONFIG_SD_BOOT=y +CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="mem=128M console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="fatload mmc 0:1 0x21000000 at91-sam9x60_curiosity.dtb; fatload mmc 0:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000" +CONFIG_SYS_CONSOLE_IS_IN_ENV=y +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_MISC_INIT_R=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DM=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_NAND=y +CONFIG_CMD_NAND_TRIMFFS=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_HASH=y +CONFIG_HASH_VERIFY=y +CONFIG_CMD_FAT=y +CONFIG_CMD_UBI=y +CONFIG_OF_CONTROL=y +CONFIG_ENV_IS_IN_FAT=y +CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_DM=y +CONFIG_CLK=y +CONFIG_CLK_CCF=y +CONFIG_CLK_AT91=y +CONFIG_AT91_GENERIC_CLK=y +CONFIG_AT91_SAM9X60_PLL=y +CONFIG_CPU=y +CONFIG_AT91_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_AT91=y +CONFIG_I2C_EEPROM=y +CONFIG_MICROCHIP_FLEXCOM=y +CONFIG_DM_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ATMEL=y +CONFIG_MTD=y +# CONFIG_SYS_NAND_USE_FLASH_BBT is not set +CONFIG_MTD_RAW_NAND=y +CONFIG_NAND_ATMEL=y +CONFIG_ATMEL_NAND_HW_PMECC=y +CONFIG_PMECC_CAP=8 +CONFIG_PHY_MICREL=y +CONFIG_DM_ETH=y +CONFIG_MACB=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ATMEL_USART=y +CONFIG_TIMER=y +CONFIG_MCHP_PIT64B_TIMER=y +CONFIG_OF_LIBFDT_OVERLAY=y