NXP layerscape architecture Chassis 3.2 builds upon chassis3 architecture with changes like DDR Memory map change, removal of IFC and support of upto 8 I2C controller.
Patch add README.lsch3_2 and the above changes under macro CONFIG_NXP_LSCH3_2.
Signed-off-by: Sriram Dash sriram.dash@nxp.com Signed-off-by: Priyanka Jain priyanka.jain@nxp.com --- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 3 +++ .../cpu/armv8/fsl-layerscape/doc/README.lsch3_2 | 27 ++++++++++++++++++++++ arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 27 +++++++++++++++++++++- .../include/asm/arch-fsl-layerscape/immap_lsch3.h | 8 +++++++ 4 files changed, 64 insertions(+), 1 deletion(-) create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3_2
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index fd31ae1..81eec78 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -180,6 +180,9 @@ config FSL_LSCH2 config FSL_LSCH3 bool
+config NXP_LSCH3_2 + bool + config FSL_MC_ENET bool "Management Complex network" depends on ARCH_LS2080A || ARCH_LS1088A diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3_2 b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3_2 new file mode 100644 index 0000000..3ecf645 --- /dev/null +++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3_2 @@ -0,0 +1,27 @@ +# +# Copyright 2018 NXP +# +# SPDX-License-Identifier: GPL-2.0+ +# + +NXP LayerScape with Chassis Generation 3.2 + +This architecture supports NXP ARMv8 SoCs with Chassis generation 3.2 +for example LX2160A. + +This architecture is enhancement over Chassis Generation 3 with +few differences mentioned below + +1)DDR Layout +============ +Entire DDR region splits into three regions. + - Region 1 is at address 0x8000_0000 to 0xffff_ffff. + - Region 2 is at address 0x20_8000_0000 to 0x3f_ffff_ffff, + - Region 3 is at address 0x60_0000_0000 to the top of memory, + for example 140GB, 0x63_7fff_ffff. + +All DDR memory is marked as cache-enabled. + +2)IFC is removed + +3)Number of I2C controllers increased to 8 diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h index 48d0ab1..5ee3a43 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* - * Copyright 2017 NXP + * Copyright 2017-2018 NXP * Copyright 2014-2015, Freescale Semiconductor */
@@ -36,15 +36,19 @@ static struct cpu_type cpu_type_list[] = { #define CONFIG_SYS_FSL_CCSR_SIZE 0x10000000 #define CONFIG_SYS_FSL_QSPI_BASE1 0x20000000 #define CONFIG_SYS_FSL_QSPI_SIZE1 0x10000000 +#ifndef CONFIG_NXP_LSCH3_2 #define CONFIG_SYS_FSL_IFC_BASE1 0x30000000 #define CONFIG_SYS_FSL_IFC_SIZE1 0x10000000 #define CONFIG_SYS_FSL_IFC_SIZE1_1 0x400000 +#endif #define CONFIG_SYS_FSL_DRAM_BASE1 0x80000000 #define CONFIG_SYS_FSL_DRAM_SIZE1 0x80000000 #define CONFIG_SYS_FSL_QSPI_BASE2 0x400000000 #define CONFIG_SYS_FSL_QSPI_SIZE2 0x100000000 +#ifndef CONFIG_NXP_LSCH3_2 #define CONFIG_SYS_FSL_IFC_BASE2 0x500000000 #define CONFIG_SYS_FSL_IFC_SIZE2 0x100000000 +#endif #define CONFIG_SYS_FSL_DCSR_BASE 0x700000000 #define CONFIG_SYS_FSL_DCSR_SIZE 0x40000000 #define CONFIG_SYS_FSL_MC_BASE 0x80c000000 @@ -64,8 +68,15 @@ static struct cpu_type cpu_type_list[] = { #define CONFIG_SYS_FSL_AIOP1_SIZE 0x100000000 #define CONFIG_SYS_FSL_PEBUF_BASE 0x4c00000000 #define CONFIG_SYS_FSL_PEBUF_SIZE 0x400000000 +#ifdef CONFIG_NXP_LSCH3_2 +#define CONFIG_SYS_FSL_DRAM_BASE2 0x2080000000 +#define CONFIG_SYS_FSL_DRAM_SIZE2 0x1F80000000 +#define CONFIG_SYS_FSL_DRAM_BASE3 0x6000000000 +#define CONFIG_SYS_FSL_DRAM_SIZE3 0x2000000000 +#else #define CONFIG_SYS_FSL_DRAM_BASE2 0x8080000000 #define CONFIG_SYS_FSL_DRAM_SIZE2 0x7F80000000 +#endif #elif defined(CONFIG_FSL_LSCH2) #define CONFIG_SYS_FSL_BOOTROM_BASE 0x0 #define CONFIG_SYS_FSL_BOOTROM_SIZE 0x1000000 @@ -147,6 +158,13 @@ static struct mm_region early_map[] = { PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_PXN | PTE_BLOCK_UXN | PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS }, +#ifdef CONFIG_SYS_FSL_DRAM_BASE3 + { CONFIG_SYS_FSL_DRAM_BASE3, CONFIG_SYS_FSL_DRAM_BASE3, + CONFIG_SYS_FSL_DRAM_SIZE3, + PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_PXN | PTE_BLOCK_UXN | + PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS + }, +#endif #elif defined(CONFIG_FSL_LSCH2) { CONFIG_SYS_FSL_CCSR_BASE, CONFIG_SYS_FSL_CCSR_BASE, CONFIG_SYS_FSL_CCSR_SIZE, @@ -292,6 +310,13 @@ static struct mm_region final_map[] = { PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS }, +#ifdef CONFIG_SYS_FSL_DRAM_BASE3 + { CONFIG_SYS_FSL_DRAM_BASE3, CONFIG_SYS_FSL_DRAM_BASE3, + CONFIG_SYS_FSL_DRAM_SIZE3, + PTE_BLOCK_MEMTYPE(MT_NORMAL) | + PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS + }, +#endif #elif defined(CONFIG_FSL_LSCH2) { CONFIG_SYS_FSL_BOOTROM_BASE, CONFIG_SYS_FSL_BOOTROM_BASE, CONFIG_SYS_FSL_BOOTROM_SIZE, diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index b0cec74..79bcb9f 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -21,7 +21,9 @@ #define CONFIG_SYS_FSL_CH3_CLK_CTRL_ADDR (CONFIG_SYS_IMMR + 0x00370000) #define SYS_FSL_QSPI_ADDR (CONFIG_SYS_IMMR + 0x010c0000) #define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x01140000) +#ifndef CONFIG_NXP_LSCH3_2 #define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x01240000) +#endif #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x011C0500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x011C0600) #define SYS_FSL_LS2080A_LS2085A_TIMER_ADDR 0x023d0000 @@ -45,6 +47,12 @@ #define I2C2_BASE_ADDR (CONFIG_SYS_IMMR + 0x01010000) #define I2C3_BASE_ADDR (CONFIG_SYS_IMMR + 0x01020000) #define I2C4_BASE_ADDR (CONFIG_SYS_IMMR + 0x01030000) +#ifdef CONFIG_NXP_LSCH3_2 +#define I2C5_BASE_ADDR (CONFIG_SYS_IMMR + 0x01040000) +#define I2C6_BASE_ADDR (CONFIG_SYS_IMMR + 0x01050000) +#define I2C7_BASE_ADDR (CONFIG_SYS_IMMR + 0x01060000) +#define I2C8_BASE_ADDR (CONFIG_SYS_IMMR + 0x01070000) +#endif #define GPIO4_BASE_ADDR (CONFIG_SYS_IMMR + 0x01330000) #define GPIO4_GPDIR_ADDR (GPIO4_BASE_ADDR + 0x0) #define GPIO4_GPDAT_ADDR (GPIO4_BASE_ADDR + 0x8)