If full pinctrl is enabled we don't need to manually set the pinctrl in the driver. It will happen automatically. Adjust the code to suit - we will still use manual mode in SPL.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v9: None Changes in v2: None
drivers/spi/rk_spi.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/rk_spi.c b/drivers/spi/rk_spi.c index 62434be..2b58393 100644 --- a/drivers/spi/rk_spi.c +++ b/drivers/spi/rk_spi.c @@ -182,13 +182,15 @@ static int rockchip_spi_probe(struct udevice *bus) static int rockchip_spi_claim_bus(struct udevice *dev) { struct udevice *bus = dev->parent; - struct rockchip_spi_platdata *plat = dev_get_platdata(bus); struct rockchip_spi_priv *priv = dev_get_priv(bus); struct rockchip_spi *regs = priv->regs; - struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); u8 spi_dfs, spi_tf; uint ctrlr0; +#if !CONFIG_IS_ENABLED(PINCTRL_FULL) + struct rockchip_spi_platdata *plat = dev_get_platdata(bus); + struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); int ret; +#endif
/* Disable the SPI hardware */ rkspi_enable_chip(regs, 0); @@ -249,12 +251,13 @@ static int rockchip_spi_claim_bus(struct udevice *dev) ctrlr0 |= (priv->tmode & TMOD_MASK) << TMOD_SHIFT;
writel(ctrlr0, ®s->ctrlr0); - +#if !CONFIG_IS_ENABLED(PINCTRL_FULL) ret = pinctrl_request(plat->pinctrl, plat->periph_id, slave_plat->cs); if (ret) { debug("%s: Cannot request pinctrl: %d\n", __func__, ret); return ret; } +#endif
return 0; }