Hi Kishon,
Enabled dwc3, dwc3-omap and PHY for dwc3 are enabled. Also enabled support for DFU.
Signed-off-by: Kishon Vijay Abraham I kishon@ti.com
include/configs/am43xx_evm.h | 61 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 60 insertions(+), 1 deletion(-)
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 4472c3e..3fcd99e 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -108,6 +108,64 @@ #define CONFIG_OMAP_USB_PHY #define CONFIG_AM437X_USB2PHY2_HOST
+/* USB GADGET */ +#if !defined(CONFIG_SPL_BUILD) || \
- (defined(CONFIG_SPL_BUILD) &&
defined(CONFIG_SPL_USBETH_SUPPORT)) +#define CONFIG_USB_DWC3_PHY_OMAP +#define CONFIG_USB_DWC3_OMAP +#define CONFIG_USB_DWC3 +#define CONFIG_USB_DWC3_GADGET
+#define CONFIG_USB_GADGET +#define CONFIG_USB_ETHER +#define CONFIG_USB_ETH_RNDIS +#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
I saw somewhere a discussion which forbidden using hardcoded MAC addresses.
This particular MAC looks like one for debug/development ;-)
+#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_VBUS_DRAW 2 +#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" +#define CONFIG_G_DNL_VENDOR_NUM 0x0403 +#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 +#define CONFIG_USB_GADGET_DUALSPEED +#endif
+#ifndef CONFIG_SPL_BUILD +/* USB Device Firmware Update support */ +#define CONFIG_DFU_FUNCTION +#define CONFIG_DFU_RAM +#define CONFIG_CMD_DFU
+#define CONFIG_DFU_MMC +#define DFU_ALT_INFO_MMC \
- "dfu_alt_info_mmc=" \
- "boot part 0 1;" \
- "rootfs part 0 2;" \
- "MLO fat 0 1;" \
- "spl-os-args fat 0 1;" \
- "spl-os-image fat 0 1;" \
- "u-boot.img fat 0 1;" \
- "uEnv.txt fat 0 1\0"
+#define DFU_ALT_INFO_EMMC \
- "dfu_alt_info_emmc=" \
- "MLO raw 0x100 0x100 mmcpart 0;" \
- "u-boot.img raw 0x300 0x1000 mmcpart 0\0"
+#define CONFIG_DFU_RAM +#define DFU_ALT_INFO_RAM \
- "dfu_alt_info_ram=" \
- "kernel ram 0x80200000 0x4000000;" \
- "fdt ram 0x80f80000 0x80000;" \
- "ramdisk ram 0x81000000 0x4000000\0"
+#define DFUARGS \
- "dfu_bufsiz=0x10000\0" \
- DFU_ALT_INFO_MMC \
- DFU_ALT_INFO_EMMC \
- DFU_ALT_INFO_RAM
+#else +#define DFUARGS +#endif
#ifdef CONFIG_QSPI_BOOT #define CONFIG_SYS_TEXT_BASE 0x30000000 #undef CONFIG_ENV_IS_IN_FAT @@ -238,7 +296,8 @@ "if test $board_name = AM43__SK; then " \ "setenv fdtfile am437x-sk-evm.dtb; fi; " \ "if test $fdtfile = undefined; then " \
"echo WARNING: Could not determine devicetree; fi; \0"
"echo WARNING: Could not determine devicetree; fi; \0" \
- DFUARGS \
#define CONFIG_BOOTCOMMAND \ "run findfdt; " \
Reviewed-by: Lukasz Majewski l.majewski@samsung.com