On 8/13/20 9:23 AM, Patrice CHOTARD wrote:
Hi Patrick
On 7/31/20 4:31 PM, Patrick Delaunay wrote:
Use IS_ENABLED to prevent ifdef in dk2_i2c1_fix.
Signed-off-by: Patrick Delaunay patrick.delaunay@st.com
board/st/stm32mp1/stm32mp1.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
Applied on u-boot-stm/master
Thanks
diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c index a0a2f9978f..985233f2b3 100644 --- a/board/st/stm32mp1/stm32mp1.c +++ b/board/st/stm32mp1/stm32mp1.c @@ -521,7 +521,6 @@ static void sysconf_init(void) clrbits_le32(syscfg + SYSCFG_CMPCR, SYSCFG_CMPCR_SW_CTRL); }
-#ifdef CONFIG_DM_REGULATOR /* Fix to make I2C1 usable on DK2 for touchscreen usage in kernel */ static int dk2_i2c1_fix(void) { @@ -529,6 +528,9 @@ static int dk2_i2c1_fix(void) struct gpio_desc hdmi, audio; int ret = 0;
- if (!IS_ENABLED(CONFIG_DM_REGULATOR))
return -ENODEV;- node = ofnode_path("/soc/i2c@40012000/hdmi-transmitter@39"); if (!ofnode_valid(node)) { pr_debug("%s: no hdmi-transmitter@39 ?\n", __func__);
@@ -586,7 +588,6 @@ static bool board_is_dk2(void)
return false; } -#endif
static bool board_is_ev1(void) { @@ -634,12 +635,11 @@ int board_init(void) if (board_is_ev1()) board_ev1_init();
-#ifdef CONFIG_DM_REGULATOR if (board_is_dk2()) dk2_i2c1_fix();
- regulators_enable_boot_on(_DEBUG);
-#endif
if (IS_ENABLED(CONFIG_DM_REGULATOR))
regulators_enable_boot_on(_DEBUG);if (!IS_ENABLED(CONFIG_TFABOOT)) sysconf_init();
Reviewed-by: Patrice Chotard patrice.chotard@st.com
Thanks
Patrice _______________________________________________ Uboot-stm32 mailing list Uboot-stm32@st-md-mailman.stormreply.com https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32