On 12/02/2018 at 18:13, Mariano Coromac wrote:
With that one there is none, I had problems with the other one.
I don't understand this sentence.
Right now I just want to know how the CONIG parameters like this one: CONFIG_8xx_CONS_SMC1=
I don't see such parameter in a sama5d2 xplained .config.
For a sama5d2 xplained board, you can refer to these files for configuration: include/configs/at91-sama5_common.h include/configs/sama5d2_xplained.h configs/sama5d2_xplained_spiflash_defconfig and other defconfigs and you can follow the initialization phase from: board/atmel/sama5d2_xplained/sama5d2_xplained.c
Device tree files are also important: arch/arm/dts/at91-sama5d2_xplained.dts
Apply to my SAMA5D2. I already have my debug uart working but not the monitor console. Therefore I can't even print 'help'. Also, I'm still having trouble with the drivers as you can see above.
On the u-boot-2017.03-at91 branch of our vendor tree, you have an example of moving the console from one USART to the other with this commit: 74f976f8d1fe714b5b28d450e7213657ca8dd71e (board: atmel: sama5d2_ptc_ek: use uart0 as console output)
Best regards,